Pinocchio

Hi Community, these two sticks are running in my Corsair ONE i165 by factory and xmp profile. I've done successful overclocking und undervolting the 9900k and 2080ti for maximum power and silence relation, now I try to get more out of the memory. Who can help what's gonna a good start? Can I boost them to 3200 with 16-17-18-37 @ 1,28V? Or what's your experience with LPX Samsung 16GB module 2666? the Kingston VLP 8GB stick in my DAN (MSI z390i) are running fine with these setting. 90min. MemTest64 thanks in advance Christian

Yes, I did that, but every time the keyboard is being unplugged and connected (without icue loaded - like the iOne is booted newly) no backlight is showing up, only the numlock light is illuminated.

I tried it, but it is not working. The keyboard is also not loading presets at power up, I tried erasing and writing the 3 profiles several times. The keyboard is dark, no light - but working on keypress. After loading icue, the icue presets are showing up. Maybe the keyboard needs to be replaced or a factory reset firmware? Regards

Can someone send me a firmware file for K70 MK2 LP? I've opened a ticket on 14.3. but no answer so far. Long answering times? Please, if someone could? thanks

Yes, the brightness selector. Thanks for answering that fast, I will create the ticket. Thanks, Christian

Hi community, I do have an issue with my K70 MK2 LP. If I press the back light button, it does nothing. Setting the back light is only possible thru icue, but not on the keyboard itself. Profile selection is working (button beside) - windows lock is working as well. strange behavior. The keyboard is around 6 months old. current firmware 3.24 is on it. what shall I do?` thanks, Christian

Hallo Gemeinde, ich habe einen Corsair One i165 seit einer Woche hier bei mir stehen. Wenn die Systemlast sehr hoch ist - Spiele in 4k Auflösung um die RTX 2080 TI ans Limit zu treiben und das System kühlt nach z.B. 15 spielen wieder langsam ab, höre ich nach dem sich die Lüfter wieder beruhigen (10 Sekunden nach dem Spiel) ein lautes knacken. Ich vermute es kommt von der thermischen Expansion der Komponenten. Habt ihr das auch? Leider kann ich bis jetzt nicht orten wo es her kommt, bis von welcher Komponente... (Gehäuse, Wärmetauscher, Platinen,..) Ist Euch das bei Eurem i160 schon aufgefallen? Gruß Christian