Jump to content

Corsair GregX

Corsair Employee
  • Posts

    309
  • Joined

  • Days Won

    2

Corsair GregX last won the day on February 27 2023

Corsair GregX had the most liked content!

Reputation

24 Excellent

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. RMx SHIFT does fit Lian Li 216, there is enough clearance for flat cables that RMx SHIFT has. Here is also a user from Reddit that confirmed he was able to fit it ->
  2. @tzerony 329mm GPU will work in your situation, barely though (will touch fans). 4000D case has an internal length of 392mm. If you subtract 38mm for radiator and 25mm for fan (dimensions as from Arctic LF II 360mm spec).
  3. You can install GPU up to 329mm in length. For your AIO, I believe radiator is 38mm and fan is 25mm.
  4. There will be support for 4070 and 4070 Ti with the upcoming XG3 RGB HYBRID GPU BLOCK.
  5. Hi @dragoneti @c-attack @KapitainKavern Hydro X Series XC7 RGB CPU Water Block (115X/AM4), SKU CX-9010004-WW and CX-9010005-WW - first revision blocks with '115X' in the name have its own backplate for AM4 installation and will not work with AM5. Later CPU water block models Hydro X Series XC7 RGB CPU Water Block (1200/AM4) - with '1200' in the name and XC7 RGB PRO will work with AMD AM5.
  6. Hi! The best usage for this port is for the temperature probe. It can also work as a drain but the bottom two ports are better for drain (are dedicated drain ports).
  7. 1000W+ for your configuration. Check PSU finder for a list of compatible / recommended options. https://www.corsair.com/pc-builder/psu-finder
  8. There is enough room for RMx Shift in H7 and H710. For anyone that is wondering about compatibility with their case, you can try the CORSAIR PC Builder or the PSU finder, both are updated with RMx Shift case compatibility data.
  9. Hi, Yes, RMx SHIFT works with NZXT H9 Flow. Side mount with cables on top of the PSU.
  10. These are adapters and are used with fittings. Compatibility wise, these are not related with your choice of tubing. Fittings should be compatible with your soft line tubing. If you have Corsair XT Softline 10/13mm tubing, you need XF Compression 10/13mm (3/8” / 1/2”) ID/OD Fitting. https://www.corsair.com/Categories/Products/Custom-Cooling/Fittings/hydro-x-compression-config/p/CX-9051002-WW
  11. Hi, very nice to hear about fast delivery! Thermal pad thickness for memory IC. Original - 1mm XG7 4090 STRIX/TUF - 1mm For the backplate, thermal pads are not required. Runs like a champ!
  12. You can be rest assured, Hydro X Series XG7 RGB 40-SERIES GPU Water Block (4090 SUPRIM/TRIO) will match all cards that are currently listed as compatible. Unfortunately, availability has been pushed to February. For notification on the actual availability please use the 'NOTIFY ME WHEN IN STOCK" option. https://www.corsair.com/Categories/Products/Custom-Cooling/Blocks/GPU-Blocks/Hydro-X-Series-XG7-RGB-40-SERIES-GPU-Water-Block/p/CX-9020021-WW
×
×
  • Create New...