VRos

Issue resolved once the full ATX cover installed. Thank you very much.

Hi. Initially, the Corsair water pump system was not working that was the reason to start my topic here, then reading more and more, and experimenting with the cables I have sorted it out, the outstanding issue remained the ATX case fans and module controller. https://www.amazon.co.uk/dp/B07ZRYHW3M/ref=pe_3187911_185740111_TE_item down on the page linked above are the description for the module. I appreciate your interaction.

I have the module controller connected with a SATA power cable, separate from the cable the Corsair water pump unit. I have moved the PWM connector to a CHA_FAN unit, and the LED/RGB to an ADD_HEADER. However, no reaction, except I few seconds Led light on the fans, then disappeared. The fans are not spinning. There is an LED button on the ATX case to control the LEDs and sequence but not responding. At present, the ATX is not enclosed, maybe this a reason for the fans not spinning as not required??? I have contacted someone who has a similar ATX case and asked him for details. Thank you.

Update: The module that has the fans controller at the back of the ATX Tower had not the SATA power cable connected, therefore no spinning / light on the water pump. After I have connected the light came on on the water pump and the 3 fans are working. However, none of the 4 x 12mm fans that came with the ATX Tower are working. All are connected to the same fans controller - but they remain still, not even the RGB lights are on/alive. I have checked all the cables and are connected properly, the CPU fan connector is plugged on the motherboard on CPU_OPT just above the dummy cable connected on CPU_FAN. I am trying to attach a picture of the module.

Hi, I have just built my new pc and took some time to get around all the cables, pins, connectors. ASUS ROG Maximus XI Formula Z390 LGA1151 Intel Core i9-9900K Retail Corsair RMi Series RM850i ATX/EPS Fully Modular 80 PLUS Gold 850 W Power Supply Unit - Black Corsair CW-9060031-WW Hydro Series H150i PRO RGB Liquid CPU Cooler - Black Corsair 163301 Vengeance LPX 32 GB (2 x 16 GB) DDR4 3200 MHz C16 XMP 2.0 Samsung 970 EVO Plus 1 TB NVMe M.2 Internal SSD EMPIRE GAMING - Darkwitcher ARGB Medium ATX Tower PC Gamer case with 4x12mm fans I have started the first time the unit, and run quickly through the BIOS settings, saved and restarted. No errors on the unit motherboard screen / codes. Immediately after restart I got a message about CPU fan not working and CPU overheating. Afraid of doing anything wrong I have turned the unit off. Checked all cables, connections, position of pump, fans, radiator and are connected as shown in the corsair handbook. I have not changed anything for the first time in the BIOS. My question: what should I do to have the unit working and error corrected, without burning my CPU? Thank you.