Jump to content

AdamWes

Members
  • Posts

    13
  • Joined

Reputation

10 Good
  1. So, it looks like I found the issue. Turns out it is wallpaper engine causing the issue. Not sure why though as I have been using it for a long time with no issues, until i swapped this screen. For now I have deactivated the iCue plug-in in wallpaper engine and all seems well. Now to see if I can fix that! Thanks for the replies everyone.
  2. I do have a commander pro, which was working fine for the last 8 months or so without a single issue, until now.
  3. It launches, I can see everything, it just doesn't work. If i try to change profile nothing happens. Although my fan curves and mouse perf. settings are all still working, just the LEDs seem affected.
  4. So after swapping out a monitor, my ALL LEDs in my system have stopped functioning. Not sure why a monitor would have anything to do with this, but it happened right after. Keyboard, ST100, mouse, all fans, lightstrips ... just glow a dull white, and maybe half of the LEDs in each are on. I cannot change any profiles, colors, nothing. I have re-installed/updated icue to no avail. If I reboot the system, they work normally for about 30 seconds, then just stop and turn to the dull white. Anyone have a clue?
  5. nvm ... the card is defective.
  6. A friend of mine recently purchased a 5180, it was working great for a few days. Now, all of the sudden the GPU fans go to 100% and the screens go black. It doesn't just happen running a game, it happens when running nothing. It also happens right after start up. Anyone here see similar issues with this model? There are just so many things it could be, I was hoping to narrow it down with a known issue on this model. Thanks!
  7. This isn't working for me, no change when I use Toasted's Method. The only way I can fix mine is to go into display settings and lower the TV down to 100% like my other screens. Am I doing something wrong?
  8. Is there a way to get iCue to open on start up? I have checked the "start on system startup" button, but nothing. My profiles load and everything is working as it should, but I just want the software to open up to one of my monitors automatically. Thanks.
  9. Picked up my Void Pro a week or so ago, and I must say, I love them. I am however having an issue with Windows 10 I wonder if anyone else ran into. When using the headphones, I always have to switch manually from speakers to headphones, and back again. When I turn on the phones, Windows is not switching it to that output, and when I turn them off, it is not switching the sound back to speakers. Anyone else run into this?
  10. Looks like I was wrong, the LL fans can be driven right down to 0RPM. However, in iCUE, when using the "Fixed RPM" setting they won't go below 700. When using a custom curve they will go all the way down to 0! This is good :)
  11. Thanks for the reply guys .. seems I found the issue. The LL fans are not capable of running much below 700RPM, which kinda sucks. Guess I have to deal with it.
  12. Thanks for the reply! I have set up a custom profile, but that is really odd that you would need a thermal probe just to manually drop fan RPMs. I won't be using them as I have no need for them. I was hoping to be able to at least shut 1 fan off when it isn't needed.
  13. I finally got my Commander pro and I am loving it. Just had a question with regards to FAN speeds. In the vids I watched it said they can be controlled right down to OFF. No matter what I set my RPM at, the fans do not drop below 600RPM. Even if I set them at 500RPM fixed, they still run between 600 & 700 RPM. I cannot get them to go any lower, certainly not OFF. What am I missing?
×
×
  • Create New...