gasolin

https://www.corsair.com/eu/en/Categories/Products/Liquid-Cooling/Hydro-Series-H100x-High-Performance-Liquid-CPU-Cooler/p/CW-9060040-WW

#25 I can't get near 14 14 14 14 34 how do you do it (won't run at lower cl at high speed than 16) #44 My white kit runs smoothly at 3200mhz @1.35v 16-18-18-36 The red kit can only obtain a speed of 2933 with the same settings My CMK16GX4M2B3200C16 v5.39 runs at the same setting Asus Prime X370-PRO but when ever i take prime 95 blend or any of the other test, workers stopped, my cpu is a ryzen 5 1600 have you tried prime 95 blend (lots of ram tested)? When mhz is lowered to 2933mhz stability is 100% stable (so fare) am4 motherboard memory support list https://www.amd.com/system/files/2017-06/am4-motherboard-memory-support-list-en_0.pdf Some say go for samung ram, so her is a list if you don't know it, my corsair ram is SK hynix https://www.reddit.com/r/Amd/comments/62vp2g/clearing_up_any_samsung_bdie_confusion_eg_on/ http://peecee.dk/uploads/082017/2017-08-17_10_57_41-CPU-Z.jpg

It vouldn't boot on normal voltage (1.35) on aut it did

It's aut volt

At this ram speed 3000mhz or higher the asus bios tends to give the ram way above 1.35 volt which is normal for 3000mhz ram, the manufactures of mb has to make bios updates and of course mb's that can handle high mhz ram, also ram manufactures like corsair have to make shure they actually can run at there rated speed and volt, not enough they all run stable at 2133mhz which i think all ddr4 ram can do

Didn't work for me have 3000mhz ram, what ram do you have? (im downgrading to 2x8gb kingston fury x 2133mhz ram)

New bios today 3016 it can't boot with the ram at 3000mhz (Asus Z170 Pro Gaming) Didn't try setting timing manually

It seems to me xmp doesn't set the timing right, it's surpose to be 15 17 17 35, it just isn't even with xmp it's not, adjust cpu vccio voltage and cpu system agent voltage

http://peecee.dk/upload/view/463989 Can't corsair vengeance lpx 3000mhz cl 15 run at more than 1300mhz (2600mhz) without being stable? TPU I oc's the ram and cpu to air cooler and it's at 1467mhz(2934mhz) and 4.1ghz

Cpu Vccio 1.000volt Cpu System Agemt Voltage 1.130volt Xmp 3000 (have 3000 mhz ram) Had to change timing to 15 dram cas (i think it was 15 all the time) 17 ras to cas (it might have been 1 higher or lower) and 35 ras act time (it use to be 36) i did all that before i tried xmp 3000 1 time ibt standard 10 runs pass goal maximum 10 runs pass http://peecee.dk/uploads/122016/2016-12-22_11_21_17-.png

I once had an i7 4790k and a asus maximus wii ranger Z97 motherboard, i wish i still had it since it seems better than skylake and asus Z170 motherboards

Mine is 2x8gb i could have gotten for a bit less 2x4gb 4000mhz corsair vengeance ram they should be able to run at 3000,3200 even 3400mhz which is max asus rated ram speed,without the ram being unstable, then it would be the mb,bios or both that isn't doing a good job Does anybody know if it's the ram,mb or bios or mb+bios or alle 3 things that does work together

Asus Z170 pro gaming can only run them at 2933 mhz http://peecee.dk/uploads/122016/2016-12-20_23_02_22-CPU-Z_big_thumb.png It's these ram corsair vengeance 3000mhz ram http://www.corsair.com/en/vengeance-lpx-16gb-2x8gb-ddr4-dram-3000mhz-c15-memory-kit-black-cmk16gx4m2b3000c15