Jump to content

bsanders03

Members
  • Posts

    84
  • Joined

Reputation

10 Good
  1. ok, GPU is overclocked, so maybe that is why? I could send you specs of overclock, maybe I am running something too high? Also, what is the optimal temp range that you think is best for idle and also for gaming?
  2. So I am good leaving it alone Zotty? Also Zotty. Can you look at my specs in the first message and see if they look good
  3. What should the RPMS be set to for the PSU. Should it always be running ? Also, what other monitoring software is better. HWinfo just crashes my commander pro
  4. bsanders03

    Opinions?

    I thought I would upload this to see if anyone thinks these temps and stats are good. First time building my computer so I just want to see the general publics thoughts. I included the before and after pics. System at idle, then when I was playing fortnite. I also included the specs of my settings in fortnite.
  5. Of course, lol. Both of my lighting node pro spots are being used. Where else could it go?
  6. Yes. It did happen during that. But also the commander pro disappeared prior to that when doing other normal operations. Also, the fans speeds seem to not be adjusting when change them from quiet to any other setting. Just kind of seems like erratic behavior. Is the most recent update buggy? Also my keyboard. K 70 is not updating either. It goes to load firmware then the keyboard disappears from ICUE until I restart computer.
  7. I am having some strange behavior with my commander pro. It was having my fans under my commander pro operating at 1700ish rpms. Temps didn't seem to be high, the system was just at idle. Then, out of nowhere, the commander pro no longer shows the "performance" option in icue. It shows the other options, just not performance. I tried reinstalling icue, it worked, then it messed up again. Could this be a bad commander pro, or what else could be causing this
  8. I am trying to hookup the 1 plug for the corsair logos. Where do I plug this into. I am running 9 total LL RGB fans, and have all the ports on my commander pro occupied, including the LED channels. I do have an open spot on one of my RGB hubs, but this hub houses 3 of my LL 120 RGB fans. Am I able to plug this into one of those ports? I know you aren't able to mix certain things on those hubs. Currently that is where it is plugged in but I don't have any light on the logos. HELP.....
  9. So I have a new PC put together and it was working great. But I am having an issue with some of the fan RGBs and my LED strips. So what will happen is when I turn my PC on, the FAN RGBs and LED Strips will not turn on until after I get into the Windows Desktop. usually its about 5-8 seconds once the desktop is loaded. The memory always kicks on right away. Just my LED strips and 9 RGB fans do not light up. The fans are running fine, just no lights until after the desktop loads. Any advise? ICUE is up to date
  10. Is it ok to update to iCue's most recent update? Heard mixed rumors it was unstable???
  11. bsanders03

    Help me

    I am currently doing a build with the following... Intel i9-9900k GIGABYTE Z390 AORUS Master 1000 watt power supply MSi Geforce 2080 TI Gaming X Trio With that being said, I am trying to find the best memory, but looking at gigabytes QVL list for memory, I am not really showing any CL14 memory. Also not seeing at 2 x 16 configs. Only 2x8 configs. What is the best recommended? Any help would be great. I included the attachment below of memory mb_memory_z390-aorus-master_20190214.pdf
  12. I have a Crystal Series x570 case. I am looking at doing a i9 9900k What is the best board that would fit this case? Money is not a concern
  13. Nice. Do you have a link to the splitter you used by chance?
  14. So iCue will recognize the HX1000i PSU when connected into the motherboard via the USB 2.0? I just figured iCue was one place to see everything, such as the RGB of my fans, and memory, and RGB strips. Along with the fans Is AIDA64 / HWinfo better to use for all of this?
  15. Ok, so maybe just do 3 in the front pulling in, then 2 at the top and 1 in the rear? Should the one at the top push in or pull out? Which do you think would be better? Now, where do I put the 1 plug for the corsair logos?? Thanks for your help
×
×
  • Create New...