SolidusSnake

So It looks like the pump RGB splitter is dead. If I plug the CPU block directly into the commander pro or lighting node pro. Lights right up. If I plug it into my lighting node pro same story, if I plug the XD pump rez combo into either the commander or lighting node pro. Neither will acknowledge the block after telling it I have 1 pump/rez and 1 block. *NOT* A happy corsair user at this point. Looks like I have to spend money on corsair clear coolant, and drain my entire loop just to fix this. Can someone at Corsair Just send me the top plastic piece that contains the RGP splitter so I can just replace the top instead of draining the loop going through an RMA and sitting around waiting for weeks? Or do we know if this is a known software bug that was introduced?

So, I'm having a bit of an issue. My pump is lighting up as designed, and I'm using the Pump daisy chain to light up my CPU block, The only thing is the CPU block's lighting has from what I can tell possibly isn't working, or it could be the XD5 daisy chain isn't working anymore. I've removed and re-added them together and the pump always lights up. How could I test the wires on the pump vs the wires on the CPU block to determine which one it is... I don't want to RMA them both, and I certainly don't want to wait around for weeks.

Is there any way to get a set of corsair stamps back covers for my 120MM fans that will cover the black corsair sticker? I'm thinking something nice and aluminum. Plastic I suppose would be fine.

I have the pump hooked up to the port 6 like the Hydro Series Tutorial asked me to do. I also set a few custom curves to get the air bubbles out, and finally set one for just every day use. So good then seems like I've done everything correct. Excellent. I appreciate it. Now I just need a few more fittings to get here so I can fix the loop and make it more pleasing to my eyes. Then I will finish the wire management and take some photos.

I have my pump setup with the probe in Temp slot 1 in my commander Pro and the xd5 set up for power on port 6. How do I get control of the pump to speed it up or down? It keeps telling me to put the temperture sensor for my XD3 , but I don't have an XD3 I have an XD5 and the temp sensor is in port 1 like its asked for it to be. "This performacne setting is intended for use with Corsair Hydro X Series Water Cooling components. In order for this cooling mode to function please insert the temperture sensor from your corsair XD3 pump / Reservoir combo into TEMP1 on the COMMANDER PRO" Is my commander pro just broken?

Does anyone have any issues with the scimitar mouse wheel? My wheel is now freely spinning just happened a few min ago. This happened in less then 1 year from the purchase date. Is this a common issue with corsair mice? Is my M65 not far behind? Should I consider switching brands? I would like to also mention, My other mice... still work.. just fine. This is the first mouse scroll wheel I've ever had break on me on a mouse that cost in excess of 60$ ( My retired Razer Naga / Razer Death Adder ect... I'm using the naga as a replacement atm. )

Can someone tell me if I'm doing something wrong. I've gone into the default profile, I went into actions for each of the "G" keys I assigned them to F13 ~ F24 yet nothing recognizes any of the actions , I've rebooted I've done everything I can think of. Why does the mouse not have a default configuration out of the gate for the "G" keys?