Jump to content

koke6645

Members
  • Posts

    22
  • Joined

Reputation

10 Good
  1. Try to set %APPDATA%/Corsair/CUE5/canvas/canvas. to read-only. This fixed my issue. Source:
  2. Report issue: iCue crash when runing NiceHash Quickminer. Those 2 programs couldn't running at the same time. It doesn't have this issue before an update. Tested with 3 computers, and all of them have the same behavior. Rollback to the previous version was able to solve the issue.
  3. Turn on Motherboard synchronization in L-Connect. Then set the CMP light channel in iCue to be RGB extension strips.
  4. Their is a "Copy" button on the bottom right that auto copy and past it to every profile.
  5. Only temporary fix right now is to create you own fan profile.
  6. Have you try creating a change profile action and bind it to some specific key first then create a hardware action to activate that specific key.
  7. Don't worry, you aren't alone. The video lighting has been broken for more than several months now. Welcome to the broke club :biggrin:
  8. Yes, you can daisy chain the extension cable. However, you have 60 LEDs maximum per channel due to 5V limitation. Also if you daisy chain the extension cable far too long, the strip may not light up correctly.
  9. They need to upgrade their RGB strips. just give us an upgrade rgb strip that look like LT100 and SL100 and call it rgb strip+ or something. My Phanteks neon strips and a rgb strip for the LANCOOL II case can work with icue. I mod some adapter to make it work, but it is annoying coz the number of led aren't match with the option in icue. :evil: Just shut up and take my money already! :evil: Look at that old corsair RGB strip in the middle compare to defuse RGB strip at the front....
  10. U guys need to update your product. Just give us an upgrade rgb strip that look like LT100 and SL100 and call it rgb strip+ or something. My Phanteks neon strips and a rgb strip for the LANCOOL II case can work with icue. I mod some adapter to make it work, but it is annoying coz the number of led aren't match with the option in icue. :evil: Just shut up and take my money already! :evil:
  11. Have you check the rgb connector and the cable between CDP to Hub? Also you may need to check ur PSU and the way you hookup the sata power cables. White light draw the maximum current according to DevBiker in this post.
  12. Try this solution (It fixed my): Power & sleep > Additional power settings > Change plan settings > Change advanced power settings Then under 'USB settings', under "USB selective suspend setting' set it to 'Disabled'.
  13. I use iCue for controll all my rgb so the Aida64 isn't an option for me.
×
×
  • Create New...