Jump to content

scgt1

Members
  • Posts

    40
  • Joined

Reputation

10 Good
  1. My buddy just built his first open loop with Corsair and called me with the same issue. He says the flow is terrible and he has giant air pockets all over. To be safe on initial fill and bleed he is running just the psu to the pump and using the psu jumper to power the pump via molex. So for the OP to have a weak pump if not ran through commander and my buddy to have the same either they are shipping faulty pumps or something has been changed in them. I personally use EK pumps/res and the things will suck a 200ml res down like nothing just powered off a jumped psu. So this whole weak sauce pump issue is all new to me and had to go looking. Nice to know he isn't the only one having this issue.
  2. Went to my local Ace after tearing the website apart looking for these items. I could only find the nylon spacers in white and got 2 sizes. The 3/8 tall they had were too small of an ID to go over the pegs in the top and the next ID up were 1/2 tall which wouldn't allow the stock fasteners to screw in at all. So pulled the trusty drill out and drilled the 3/8 tall ones out another ID and good to go. As to the feet extenders the clear ones they had there were much larger diameter then the Corsair feet and wouldn't have looked correct. So still hunting something to raise the case itself.
  3. Just finally installed the set I got from Newegg a month or two ago. The lighting is terrible with a Strafe MK2. Most of the keys are only half lit as if the shine through section is thicker on half the key or something. They also aren't nearly as bright as the stock keys. Frankly if I got to these within the return window I would have swapped back to the stock keys and sent these things back. Worth the $50 Corsair wants for them=NOPE Worth the $25 I paid Newegg for them=Not really Should I have purchase the pudding HyperX caps for $20 or some China knock offs and dealt with a funky bottom row=Yea probably as I honestly wouldn't feel so robbed right now. Maybe I just got some old stock from original batches who knows but they sure aren't what I expected other then the feel. The non uniform shine through of the RGB is just terrible!
  4. Same issue here and now I've been staring at ICue copying new files for an update with it stuck midway for the past 20 minutes or so. :roll: I also believe Icue is causing my rig to take for freakin ever to boot up as that is about the only thing really left starting with windows. Fresh install a bit back yielded the same results. Heck I have the SN750 for an OS so it sure isn't drive load times causing it.
  5. scgt1

    680x

    HOLY F! What were the engineers thinking? LMAO I thought the fact of them taking away the 120mm adjustment in the top of the 280X was bad. Here they put in adjustment but misplaced it for not just the 120mm but the 140mm it looks like also. Misplaced it as in you can't move the fans forward or backward even though they are slotted. SMH! I was debating changing to this case from my Custom powder coated 540 Air but I've had a hangup with trying to get Corsair to give internal front to back measurements so I know if I can use my UT60 in the front considering they increased the internal height over the 540 but shrunk the internal depth (F to B). I currently could plug in the EVGA powerlink but have absolutely no clearance to provide power to them. With them shrinking the space inside in that regard I may not be able to use the UT60 which is a no go.
  6. This does nothing for my H2100 still no volume slider function on my MSI B150M Mortar Arctic running WIN 10 PRO X64. Headset works as it should with my Maximus VIII Formula with same windows.
×
×
  • Create New...