Jump to content

craigbrown

Members
  • Posts

    5
  • Joined

Reputation

10 Good
  1. If you look at the video (it is working in the video) it is the middle fan on the front of the case. Everything is running as default. It worked fine for a month. Here is a screen shot from iCue. I don't know what fan is what number. I have the three in front; one in back. And two (that came with the case) on the bottom pointing up (just for looks). Also two on the cooler. BTW: Not complaining about the noise, I don't need the bottom fans, I just like the way it looks.
  2. I built my Corsair Super Computer from info on these forums, so thanks for the info! Came out pretty good. See it here: [ame] [/ame] But, the center fan has stopped spinning. Also, one of the light strips was DOA. I saw in a post that I should not send back to place of purchase. How do I replace the defective parts? BTW: It is a 12 Core I9 with 128 gigs memory. Built to run a massive Information Security Project. But nobody cares about the specs, they just think it looks cool :-) Only thing, it's as noisy as being on an airplane. My favorite peripheral is my Sony WH1000XM3 noise canceling headphones.
  3. Thanks for all the info! I got my mirror black case almost running. But I have two issues. 1. I need to plug the lighting pro USB into the commander. The plugs are different sizes. Is there an adapter for this? 2. The case lighting no longer works. I broke the speed/lighting control so I need to attach it some other way. I found a cable that fits a fan header, but I don't see a cable to plug into the RGB hub. Thanks!
  4. Thanks for all this great info! I have the Mirror Black case with the H100i Platinum cooler. I melieve the fans are ML120. I think the fans are being controlled by the cooler. I want to replace the front fans with LL120's. I understand that the hub that came with thge case cannot be used so I may as well take it out. The 3 pack of LL120's comes with a hub and a node plus. Do I need another hub to control the ML120 fans on the cooler or are they ok where they are? It I have one LL120 at the back of the case. It is just white (because I don't have a controller). Because of the outer rim, it looks wider then the sp120's in the case. Is the cut-out at the front of the case big enough to show the rim? I have 8 vengence rgb pro ram sticks which look awesome. I can see them in iCure so I assume they don't need to connect to anything. My power supply is Seasonic so I guess that there is no way to mintor that. The board is a Gigabyte Gamer Pro 7. Lots of lighting but again, no way to control it. There are two dark areas of the case. One above the power shroud and one at the bottom of the case (to the right of the shroud). I had purchased another cooler which did not fit the case. In my attemt to mod it I made it unreturnable. It was two 140mm ML fans. I was thinking of puttint one on top of the scroud and another at the bottom of the case. Would that work? Thank you for the advise, it is greatly appreciated !
×
×
  • Create New...