LeeandLee

Perfect. Thanks alot! Hopefully this is all I need. IT seems to be as im reading it.

can anyone clarify this so i can get on with the build please? This is all i need to know now

So i plug the usb that is attached to the Light Node Core into the Commander Pro USB connector? Then I plug the Commander Pro USB into the motherboard? And omg im dumb with the fan connectors lol. So where do i plug the RGB connectors for the LL120 fans on the h150i then since there are 9 rgb connectors in total? And i asked again because i was seeing others who posted after me get responses before me while 30 people viewed my post and no response. So its not unreasonable to ask again imo.

Anyone? Im trying to get this build done today. ITs taken me 1 month from numerous complications and lost packages and returns etc. Now this

Ok So i have everything installed in my new system etc. Just need to get the wiring now which im confused about now. I have 6 QL120 fans in the case and 3 LL120 fans for the h150i Pro. Im lost after that. I looked up Zotty's but it seems to be missing this speicific config and only shows it with splitters etc. The Ql120 come with Light Node Core not the Light Node Pro. I also bought the Commander Pro. So my questions are. First the h150i Pro. Do I plug the USB attached to the H150 into the motherboard? There are 3 fan plugs for the h150i as well as the 6 fan plugs for the 3xLL120 fan connectors(rgb and fan control). No idea where those 3 fan connectors go. They cant attach to motherboard since they are pins not the intake plug type or whatever you call them. Where do i plug the LL120 fans and RGB into since ill be using 6xQL120 as well? The Light Node Core cant attach to the Commander Pro like the Lighting Node Pro does. So now im fully lost.

I have 6 Ql120 fans and they are all extremely difficult to screw them in to the case and i cant even screw them in all the way. Quite disappointed in such expensive fans. On top of it all the screws are those type of screws where the head gets damaged very easily. of course they sell extra screws becuase they know

I have 2 x H100i and both have been working for many years. Sucks that yours break

So UPS lost my 6 QL120 fans and NEwegg wont give me a refund until 5-8 business days of an investigation. Im so pissed off at Newegg and UPS for not issuing an immediate refund. I will never use NEwegg or UPS again. There are plenty of other places i will spend my money instead.

Ah ok for some reason this made it clearer for me. Sometimes its just that one little thing that even if its a repeat makes it asll clear. THANKS. Ill check back in when i get the fans today if i have any issues.

I have 6 QL's all together, not 9. And Im using 3 LL's as my rad for the h150i. What I dont get is there is only a couple of USB slots on my motherboard how am I supposed to hook everything up? Between these fans setups and the computer case set up and regular comptuer set up... I jsut dont see why in 2020 they cant just make this a simple plug and play. Plug the fan in and use software to change colors etc. Instead of all these plugs and rerouting. Its insane and a real mess. Im leftg baffled and confused and frustrated. This was supposed to be such a enjoyable event for me like usual and its the absolute opposite. Even the cables I bought from Cablemod are missing the rightg cables even though i followed their website compatiblity and asked them directly if this is was the right one. Then after i get it they said oh we need to mail you out the right 24 pin..... live inCanada and its New Years so i wont get it for weeks. So i bought Corsair Premium cables but honestly, they jsut arent as good. The wires have heat wrapped resistors attached to them and they only give you 1 comb for the entire 24 pin so its a mess. For $150 CDN its not worth it and its going back as well. UGH sry for venting.

Ok so i notice that the QL120 comes with Lighting Node Core and the LL's came with Lighting Node Pro. So now what? Do I still need the Commander Pro with the QL's? Is it the same thing?

I was thinking of making the bottom and side exhaust so the fans could look good and making the top rad intake. However not sure that is even a good idea as the rad fans will be the only intake and im sure itl be blowing warm air inside the case as well from the rad. Honestly the fans look like crap with them as intake. Most of the led is missing AND all the wires are showing. IF i paid attention to this i would not have bought them

Toi me there is no doubt that the QL looks much better, however, im from Canada and they arent plentiful here in good retailers. and they are expensive. 50% more expensive. Spending $400 on 6 fans.... ..

WOW im installing the LL120 fans now and one disappointment after another here. So the intake for these fans is the side that hides most of the LED. Its the X side that doesnt have the ring as well and i was planning on doing 6 for intake and the rad of exhaust. and of course the intake ones are the most noticeable. I mean geez whats the point. This build feels like a failure from the beginning. I sued to love buildinging computers. This is jsut a turn off and disappointment.

Im one step closer now. I want to thank you for not being impatient with me. Especially since you are probably repeating things for me but that is how im going to learn for me. One thing i just noticed. I can return the ML120 easily now and get a pack of LL120 on sale again. Should I do that so all fans in the case can be the LL120 instead of the rad fans being ML120?