Sliv22000

Thank you so much! Just so I’ll get it straight, the Pump cable and the ML’s Leds and fan control cables go right into the Commander Core which will connect to a usb 2.0 header on the Commender pro or the motherboard and will connect to the psu through sata cable. The pump also has a tach cable which connects to the cpu_fan header on the motherboard. As for the 6 HD120, the LED cables will go to the LED hub which will connect to an LED channel on the Commender pro, and the other 6 fan control cables will go to the 6 fan control ports on the commander pro. The commander pro will connect to a Sata on the psu and to a usb2.0 on the motherboard. Is all of this correct? I have two more questions. Feel free not to answer as you helped me a lot already :) 1) do you think i should stay with my HD fans or replace the hd with ML or QL fans? Do you think QL fans with the 3 ML on the rad would be a nice combo and will sync nicely on ICUE? 2) is all of this still possible and relevant if I were to replace the 6 HD fans with 6 ql/ml fans?

So I have a 570x case and I am now building a new system with i 9 10900k and i want to oc it to 5.1ghz and after digging up I’ve found the h150i xt and the elite AIO coolers. I already have 1 hd120 fan in the rear case, 2 140hd in the top and 3 120hd in front. I want to do a push and pull config with the 3 fans that come with the cooler and with my 3 hd120 fans. Also I own two fan hubs, one lighting node pro and one commander pro. The thing is after seeing a lot of reviews i really am confused about all of the cables and to where each one goes, so if someone can help me I have few questions. 1) with which one should i go, the elite or the xt version? Who would have better cooling performance? If they are the same, then i would just go with the elite due to the rgb fans. 2) If i go with the elite, i saw it comes with the commander core. So that is where i should connect the 3 ML’s fans and rgb connectors to, and the other 6 hd fans to an hub which goes right to the commander pro? 3) is the ML fans on the pull config have smart rpm set? I mean that they can see the cpu temp and the icue would choose automatically the best rpm from 0-2400. I know I’m asking for a lot but i really want to sort thing out in my head before i purchase anything so it wont turn on me later. If someone can please explain to me where i connect each and every cable to so that everything will be synced and connected well in iCue, i will appreciate it.