Thanksforthemem

Looks like I'll go for the SanDisk Extreme pro with such a lack of support from Corsair staff !!

I have several of the above drives (red/black rubber case) yet now seeing adverts thatv quote much higher write speeds ?? My drives (64,128,256gb) write on average at 80Mb/s on usb 3. Adverts now claim write speeds in the region of 240Mb/s yet look EXACTLY the same ???

MP600 1tb running well on an intel x99 motherboard but still a way off the speed this device can muster. Are there any intel platforms that can drive pcie 4 at full speed ?, x299 maybe ? Thanks in advance

What's the 11.3 update do ??. Just updated and still working :eek:

Without one you cannot read the smart info or set TRIM etc. Samsung provide one for their drives !!

I used the free Macrium Reflect (from their website), the only thing that would work. Still it got my partition size wrong (could have been my error) so found another free online tool to expand it to full size (512Gb > 1Tb).

Samsung have Win7 drivers for their drives !. Where's the one for my MP600 Corsair ??. Are you going to ignore my post ?, are you only aiming this drive at Win10 users ?

Samsung have Win7 drivers for their drives !. Where's the one for my MP600 Corsair ??. Are you going to ignore my post ?, are you only aiming this drive at Win10 users ?.

Think I had the same problem with windows Disk Management not seeing the drive (in a PCI adaptor as I only have one M2 slot) but can only remember using the latest (free download) Macrium then another free tool to expand the partition to full size as Macrium didn't expand for some reason.

I'm running Win7 with a force MP600. Corsair haven't done a driver for Win7 so windows uses a simple generic one. The only thing you lose is The ability to read SMART and temperature sensor data etc. Image software such as Macrium Reflect (free download) will see the drive and copy your system across if that's what you hope to do.

Confirmed, Win10 can read SMART, Win7 is missing a Corsair driver. What are you doing about it Corsair..... nothing ?. Samsung provided a driver for their drive !!

It appears the MP600 may need a driver for win7 64 as Samsung provided for their drive. Are you going to support this drive under win7 Corsair ??

Corsair - what are you doing about this ??. Is a new better ssd toolbox about to be released ?. If the toolbox has issue reading my new drives data I'd expect at least a helpful error message !!. Do you have a link to the Phsion toolbox for the controller ?, a link to a bootable image that will read the drives data ??

I may have found the issue. I noticed the pc still had a Samsung NVME driver installed !. Concerned what windows 7 will do if I remove it though as Corsair don't seem to have a driver for the Force MP600 ??? Nope removal of the Samsung MVME driver did nothing. 'Scan for hardware changes' nothing (just the usual list of drivers not found for motherboard devices yet Storage Controllers ok).

Just installed and using the latest Corsair SSD Toolbox shows no SMART info and no TRIM support ??