Jump to content

Lakristomten

Members
  • Posts

    13
  • Joined

Reputation

10 Good
  1. Check my reply. So both sides seems to take turns to blink red to leave the other blank. Temps are not going over 49-51c with just a few minutes into gaming. Turning more gfx on makes a coil whine also start. I have backup all my files, I even got myself win10pro to install. Next saturday I am going to have a guy look at my computer. BIOS, OS etc. I have 3 other guys willing to help me online. But I think somethings up with my pumps. What can I provide and where to be able to send this and how is the warrenty period? Also if you get a new piece is it a new warrenty period coming with it? I am not particulur keen on sending it. How long is the period to get your unite back or a replacement unite? Cheers
  2. If I am not mistaken it has been on both sides also with the lights going dark. Well I know it is overheating but it is crazy since the temps aren't that of as I stated. With the airflow. It has enough space on both sides and top for air to travel and not to build up in a corner.
  3. So I bought this system 5-6 months ago. The i160. Now it has been as for many alot of troubles. Fresh I got VAC error when trying to play CS. Ended up actually reset the whole PC from scratch. As many others annoying sound from the GPU when ramped up, uneven stepup in the cooling. Not beeing able to set a good fancurve. Gaming CSGO I have stutter and micro lags for some reason, but with clocked stable system and non clocked. Yesterday I found out the memory timings was off. This was after googling the NVIDIA profile inspector to check the frame rate limiter. Off banana gaming youtube channel comments I found a comment about checking your memory timings. So I am on my way to reset the PC once more. The thing that annoys me most visibly is the red or non light from the front accuring when the temps are mid 50s up to max 59c. Spending 4300(eu/$) and you have stutter micro lags in CSGO is insane. I work as a CSGO coach, this is suppose to be my traveling PC for events and also a combined streaming, gaming machine before I get my second portable. Do you have any tips that could help? At this point I dont use either gameboost or the xmp profile. Since the stutter or microlags isen't about the juice in the machine it is something in its flow. Thinking to even hire someone for this before I ship this unite back for inspection.
  4. System i160 PC Case: Mini-ITX Intake/Exhaust Fans: 140mm Motherboard: MSI Z370I Gaming Pro Carbon AC BIOS: 2.QJ VGA: Nvidia GeForce RTX 2080 Ti PSU: SF600 80 Plus Gold CPU: i9900k MEM: 32GB DDR4-2666 XMP HDD/SSD: 480GB M.2 NVMe SSD, 2TB HDD CPU Cooler: GPU and CPU Liquid Cooler closed loops Keyboard: CM Storm Mouse: FK2 Operating System: Win10 Home
  5. Hi, my name is Adam I am looking for help in manually OC my system and configure my BIOS settings. I will add information if I get any respons. Cheers
  6. Hello Searching OC settings for the i160 built. I've used a general MSI guide and followed up a CPU bench with 3dmarks TIMESPY. However I am not liking the result with manually OC. These are the following steps I've taken from a MSI guide on youtube. 1. OC Explore Mode Set to [Expert] CPU Ratio Apply Mode [All Core] CPU Ratio 50 CPU Ratio Mode [Fixed Mode] All Run at 5Ghz no matter what for system stability CPU Ratio Offset When Running AVX [-3] Tip from the guide 2. DigitALL Power> CPU Loadline Calibration Control [Mode 4] Perfect no matter what load see diagram rightside in bios 3. CPU Core Voltage 1.320 CPU SA Voltage 1.200 CPU IO Voltage 1.200 DRAM Voltage 1.360 4. Overclocking\CPU Features Intel C-State [Disable] (Power saving mode) Alternative that has been applied and followed CPU Ring Ratio 47 3 under CPU Core Voltage Mode "override och auto (same?) - I haven't set a throttling temperature - should I? My temperature with the fan curve is a bit weird, the CORE0 is higher than the others and overallt the temps jumps a bit. Looking at the HW monitor the voltage of i9900k jumps between 1.215(4)-1.3. - 3DMARKSCORE TIMESPY CUSTOM -GPU -DEMO Results: 1. STOCK 3DMark CPU test score 9 057 (3.6Ghz) 9169 with XMP enable 2. Game Boost 3DMark CPU test score 10 426 (4.8Ghz / 4000Ghz in the end) 10 242 with XMP enable 3. Enhanced Turbo + XMP CPU-Z (5GHZ Singel thread 582.3 Multiply thread5050.1 3DMark CPU test score 10 575 (5GHZ dropped too 4.4 then back up too 5GHZ) 4. 5Ghz Overclock + XMP CPU-Z (5GHZ ST 587.9 MT 5242.3/ 3DMark CPU test score 8 784 (It went down to lower rates aswell) I am looking for a 5-5.2 overclock if possible. Any suggestions, guidelines is appreciated. Also something I noticed is with the XMP enable, my stats at CPU-Z memory I dont think it works, dont know what value I should see but should it not be, show more(doubble) than 1333 in DRAM freq? /Cheers
  7. Well, the thing is. It is set on full duplex and I had my router reset. Had the game with the router, ISP provider specified game ports filter on and off. It is off now and no error, so this error was and still is a mystery, thinking it might have been something that came preinstalled. But the error was still occuring post system reset so it it very interesting tho why this happend, guess I will never find an answer too this.
  8. 9900k, liquid cooled RTX2080TI, liquid cooled 32GB 2666 DDR4 480gb M.2 z370i mini-ITX SF600, 80 plus Gold W10 BIOS: 2.QJ 05/22/2019 Anyone OC this prebuild, what is your settings?
  9. So we did a system reset also changed bios earlier version. So the only thing we didn't fully reset was the bios. Tried 4g connection. Still error. So we ruled out the isp since my other computer worked. And we changed ports on the modem no difference. The solution was changing the ethernal network card settings from full duplex to half. However I really don't know for sure since my friend was playing with the router and also could have done something I missed. I got Corsair on support now and I hope we can backtrack locate the issue. I could activate the half to full duplex to see if the problem return, but I'd love if you tried this
  10. And the problem is back, got 2 game a couple of hours. Maybe time for a system reset.
  11. Potential solution. 1. Loggging off friendslist 2. Exit Steam 3. Restart Steam as admin 4. Autologin, login into friends It worked for me, weird ****ing solution. Friend though it be a port problem in the network. Idk
  12. So new to the i160 family. Everything is great except cant get validated by the VAC system. https://support.steampowered.com/kb_article.php?ref=2117-ilzv-2837 I've tried every step but still get this error. Is it possible to search in this forum? How.
×
×
  • Create New...