Jump to content

SiD-P

Members
  • Posts

    22
  • Joined

  • Days Won

    1

SiD-P last won the day on December 27 2019

SiD-P had the most liked content!

Reputation

17 Good
  1. Sensor renaming in the dashboard does not stick. Is there a fix for this?
  2. I've installed this CoPro in to another system, gave me the same phantom Temp readings on #3 & #4 and low volts on the 3.3v rail the problem is definitely with the CoPro.
  3. No, it's directly connected to the PSU, I'll add an extra SATA power connector to the PSU. Thank you for pointing that out to me. EDIT: Added an extra SATA cable to the PSU. The issue with the temp phantom sensors still remains
  4. Okay, so just installed a brand new Commander Pro (old one died for some reason). The new Commander Pro controls 6 fans Issue I'm having is that temp sensors #3 & #4 are reporting a temperature although there are no sensors attached to the ports. see here outlined in red: When I do connect a temp sensor to these two ports, the temp reading is incorrect. Temp sesor ports #1 & #2 work without issue. What the hell is going on???
  5. Thank you, that worked for me. I don't know how I could have missed it. On another item. I have been running 2 Commander Pros. One of them has seeming stopped working. No longer visible in iCUE and the light on ComPro does not come on at all (even during boot). The fans connected to the ComPro are no longer spinning as well. Is this a dead ComPro?
  6. Okay so upgraded to iCUE 4 the other day & all seemed fine. I then noticed Dashboard items and Home screen sensor items would disappear every time I boot up the system in the morning. Uninstalled, did a fresh clean install. Seems to have fixed Dashboard/Home sensor issue, but now my SSDs are not showing up on Dashboard & there is no option to add them back in. (Samsung NVMe SSD). What's up with that?
  7. Thank you guys for this. Was having the very same issue. I deleted the widgetsMetaData file and problem solved.
×
×
  • Create New...