Jump to content

Lazybum

Members
  • Posts

    67
  • Joined

Reputation

10 Good
  1. Have an msi x570 godlike mobo, amd 5900x, nzxt kraken 360mm aio (like the dual temp readouts on the screen), 32gb of G.Skilll 3800mhz cl14 (couldnt find that fast of Corsair memory in cl14 but with all the trouble im having with gskill rgb software may just sell and get corsair again), evga 3090 ftw3 ultra and corsair hxi 1200i psu all in an o11 dynamic XL case. As far as how i hooked it all up im not sure, tho i do think i might be exceeding some limits since i think only 2 of the 3 fans on my lightning node pro light up. that prob has something to do with all the QL fans and all their LEDs tho. Do think i have one commander pro plugged into the mother board and then everything else prob daisy chained off the one. Do have another lightning node pro in a drawer from all the fan 3 packs i have ordered. Guess this weekend i will have to take things apart and figure out how i have it all wired
  2. Seems it happens on a daily basis that icue will crash, i hear a beep sound all the rgb lights go off and then they come back on and now my 2nd commander pro and lightning node are not being found. Think last time this happened i had to uninstall the program and reinstall it to get them to show back up. But if i have to do that every few weeks what is the point in having anything from corsair if the software dont work half the time? Just very frustrating when i have 2 commander pros 9 ql 120mm fans and 7 normal LL fans, new k100 keyboard, new glaive rgb pro mouse and a virtuoso headset as well, so i have prob close to $1000 invested into trying to make my lighting all match and it dont seem to work half the time. Anyone have a suggestion or ideas?
  3. With how I have my pc setup, it's in a cabinet off to the side of my desk and with having a bigger main monitor I have it setting on cube shelves behind my desk. So my keyboard and mouse cables have a longer distance to travel then normal I guess. So I was wondering if I used some usb 3.0 extension cables if I would have any problems with the rgb lighting or input lag. Had a buddy say I should use a powered USB hub. Either way has anyone used either with corsair keyboards and mice?
  4. I can't find one that isn't being sold for double the original price and from reading this thread guess I will pass for now
  5. I have a Glaive RGB Pro with the changeable left side grips and i was wondering if there was a way to remove the rubber grip off them. I have to use the smooth side piece since after awhile the rubber nubs seem to hurt my thumb. Also side question, bought a k100 keyboard few months ago and just hooked it up when i put in my new gpu this morning but only thing that bothers me is the windows key seems to be disabled, how to re enable it?
  6. few days ago i noticed none of my fans were in the rgb theme that i had setup and for the first day i ignored it, but when i opened icue only thing that is shown was headset, mouse and keyboard. Neither of the commander pros or lighting nodes are showing up anymore, so i cant control the color of my 16 fans anymore. 9 are just white, 4 are doing rainbow mode and 2 are just off. So i checked for software update and even after that still nothing to control my fans rgb anymore, so what happened where did it all go?
  7. When i first ordered my PC it was over 3 years ago and i had to get it with a 360mm thermaltake aio because at the time corsair did not make one, when they finally put one of theirs out i bought it almost right away and gave the thermaltake one to my brother. Fast forward 3 years, 2 cases later and may other changes to my PC i want a 360mm corsair aio that comes in white. My current case is the Lian Li O11 Dynamic XL white edition spent $200 on the case then $421 on white corsair fans (10), 6 being the QL series. When 3090 is finally released i wanted to redo my system in a white theme using corsair products as much as possible to only have 1 software to control all the colors. Have the fans, and memory is easy enough since it comes in white now as well but there still is no 360mm white aio by corsair. Any plans for one?
  8. https://www.amazon.com/DEEPCOOL-FH-10-Integrated-Occupying-Motherboard/dp/B077YHLDSP/ref=sr_1_2?keywords=4-pin%2BPWM%2BRepeater%2Bhub&qid=1582750214&sr=8-2&th=1 was only pwm repeater hubs i could find on amazon, either a 10 fan or 4 Option 1: splitter would run the 2 rgb hubs in channel 1 and then could i put a 3rd hub on channel 2 for the 6 QL fans? Option 2: Either way im sitting on 2 commander pro units (1 still new in box unopened) and prob have about 10 rgb hubs and prob just as many lighting node pros. if i use both commander pros can hook the 10 regular LL fans into the RGB channels 1 and 2 and then put the 6 QL fans into channel 1 of the 2nd commander pro with nothing in channel 2. In this setup would having 6 QL fans on channel 1 make channel 2 unable to be used? If i went with option 2 i would really only need 2 of the corsair PWM repeaters to be able to power the 16 fans i plan on using.
  9. not sure what the voltage of the fans are, going to be having 10 120mm LL fans and 6 120mm QL fans, either way it dont seem like there is enough in stock to order 5 of the pwm repeaters
  10. think i have some fans now on double and triple splitters, sometimes the fans ramp up and down on their own even when set to a static % so when i move to new case im hoping to fix this problem. "Click me for Corsair PWM repeater you have 4 groups of 3 fans.. could use one of those on each group and have them on the Commander Pro. meaning each group of 3 would appear as a single fan in iCUE." would it work to put 6 on one of the pwm splitters?
  11. Note. If Using 6 QL Fans on the Lighting Node Pro. you can not have anything on the Lighting Node Pro's other Rgb Channel. This is going to make things difficult for me since i just ordered 6 QL fans as part of my 16 fans. Also guess it would be 5 grps of 3 fans per and 1 single fan. Going to have 10 normal 120mm LL fans and 6 120mm QL fans.
  12. $220 for the case after taxes then $534 for 10 fans and commander pro, lol
  13. Going to be ordering a new case soon, going to get the Lian Li O11 Dynamic XL, plan is for 3 120mm on top, 3 on bottom, 3 on side and 1 in back ontop of having another 3 where ever i put the 360mm corsair aio for push/pull config as well as the 3 i have installed onto my cabinet i have current case sitting. So by my count that is 16 fans and commander prob only has 2 led channels so i figure i would at least need 2 to get all the LEDs working and that would offer power for 12 fans. 1. Would using splitters on some of the fan plug ins to power the other 4 be a bad idea? 2. Do i even need 2 commander pros? Any other thoughts or suggestions welcomed.
  14. Opened a ticket like you suggested but the 3-4 business days to reply kinda sucks. So in the meantime I uninstalled icue and now the headset mute button works and flipping the mic up mutes it as well. So like I assumed it was somehow caused by the icue software. Have not reinstalled yet.
×
×
  • Create New...