D7AMESKYRI

The motherboard (ASUS ROGs) definitely show up in, works for me. see this video how to set it up - [ame] [/ame] (CORSAIR iCUE enables advanced control over lighting and performance for our vast ecosystem of iCUE-enabled CORSAIR products. This ecosystem is now expanding to include 3rd party components, starting with ASUS Aura Sync-compatible motherboards. Notes: CORSAIR iCUE version 3.26 and ASUS Aura Sync Utility version 1.07.79 are required. More information: https://www.corsair.com/us/en/icue-in... ASUS Aura Sync Utility download: https://www.asus.com/campaign/aura/us...) Also, Asus GPUs (I have a 2080 Super OC) at the moment are not supported by ICUE. You can't sync your GPU with ICUE products yet and the GPUs can't be controlled from ICUE either, possibly in the future. NOTE: To control ASUS GPU you can use Amory Crate or ASUS Aura Sync. Asus Aura is advised not to be started when using ICUE so I now primarily use Armoury Crate Which is also a newer software and with armoury crate, you can install Aura Creator App from the Microsoft store which can be used to create your own custom layers and colours which is used for the effects in Armoury crate. Hope this helps

DevBiker, I have a similar setup but instead, I have a Commander Pro. My Setup: X3 Front LL120 x2 Top LL120 (with the H100i Platinum SE installed CPU Cooler) x1 rear ll12 x2 bottom ll120 I have my front 3, rear, and bottom 2 connected to the hub and that goes into channel 1 of the Como pro and then the 4 RGB strips into channel 2 Is there a way to setup X8 LL120 fans and a light strip to the commander pro in order to use the Sequential lighting effect? Lighting Link In ICUE does work to link all ICUE compatible devices and effects like Visor, Rain, Rainbow wave, etc, but it doesn't have a sequential option for Lighting Link. Can what I want be achieved?

Hi Guys, I have just set up my build but wanted to ask if anyone knew about setting up x8 LL120 fans to sync together with Corsair ICUE software. My Setup 8 Fan Total + 4 Corsair RGB Light Strips: X3 Front LL120s x2 Top LL120s (Hydro H100i Platinum SE cooler) x1 Rear LL120 x2 Bottom LL120s x1 Commander Pro x1 RGB Hub -I currently have the front 3, rear fan, and bottom 2 fans set up in sequential order plugged into the 6 port hub. The hub is plugged into channel 1 of the commander pro. -I Then have the 4 RGB strips connected directly into Channel 2 of the RGB Hub. -The 3Pin fan connecter which comes off the pump head is connected to the CPU_FAN header, SATA to the power supply on the Motherboard. The HX2 top H100i (LL120) Fans plugged into the two connectors that come off the pump head and the RGB Connectors are connected to the numbered connectors. (basically like this -https://www.youtube.com/watch?v=FTg2kW3ObCs) MY ISSUE: I can't seem to get all the 8 fans set up to use a sequential RGB lighting order together. In ICUE, I can use certain lighting effects using the Lighting Link effects which WILL connect all the fans and CPU pump RGB lighting together with the RAM BUT if I try to use the Sequential lighting effect, I can only seem to do it for the 6 fans plugged into the Commander Pro. The sequential lighting effect does not seem to work across all 8 fans. MY QUESTION: Can you set up all x8 fans be setup in ICUE to use a sequential lighting effect? If yes, how can you do this? If no, could someone explain why (i think I know why) but can my setup be re-arranged if I use another hub or an LNP added to the setup to get all the fans connected in a way that the sequential lighting effects work across all fans? It would be great if someone more experienced could advise?

Hi Guys, I have just set up my build but wanted to ask if anyone knew about setting up x8 LL120 fans to sync together with Corsair ICUE software. My Setup 8 Fan Total + 4 Corsair RGB Light Strips: X3 Front LL120s x2 Top LL120s (Hydro H100i Platinum SE cooler) x1 Rear LL120 x2 Bottom LL120s x1 Commander Pro x1 RGB Hub -I currently have the front 3, rear fan, and bottom 2 fans set up in sequential order plugged into the 6 port hub. The hub is plugged into channel 1 of the commander pro. -I Then have the 4 RGB strips connected directly into Channel 2 of the RGB Hub. -The 3Pin fan connecter which comes off the pump head is connected to the CPU_FAN header, SATA to the power supply on the Motherboard. The HX2 top H100i (LL120) Fans plugged into the two connectors that come off the pump head and the RGB Connectors are connected to the numbered connectors. (basically like this - [ame] [/ame] ) MY ISSUE: I can't seem to get all the 8 fans set up to use a sequential RGB lighting order together. In ICUE, I can use certain lighting effects using the Lighting Link effects which WILL connect all the fans and CPU pump RGB lighting together with the RAM BUT if I try to use the Sequential lighting effect, I can only seem to do it for the 6 fans plugged into the Commander Pro. The sequential lighting effect does not seem to work across all 8 fans. MY QUESTION: Can you set up all x8 fans be setup in ICUE to use a sequential lighting effect? If yes, how can you do this? If no, could someone explain why (i think I know why) but can my setup be re-arranged if I use another hub or an LNP added to the setup to get all the fans connected in a way that the sequential lighting effects work across all fans? It would be great if someone more experienced could advise?