CPU = Intel e8500
Motherboard = GA EP45-UD3P Rev 1.1 
BIOS Version = F7
Ram = Corsair CM2X2048-8500C5D - http://www.corsair.com/_datasheets/TWIN2X4096-8500C5D.pdf
Power Supply = PC Power and Cooling - Silencer 750w


Code:
MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...............: Auto 
CPU Clock Ratio ..........................: 9x
Fine CPU Clock Ratio.....................:.+0.5
CPU Frequency ...........................: 3.16 Hz( 333x9.5)


Clock Chip Control 
Standard Clock Control
CPU Host Clock Control..................: Disabled 
CPU Host Frequency (Mhz) ............: 333
PCI Express Frequency (Mhz) .........:100

C.I.A.2 .................................:Disabled


Advanced Clock Control [Press Enter]
CPU Clock Drive...........................: 800mV
PCI Express Clock Drive.................: 900mV
CPU Clock Skew (ps)....................: 0ps
MCH Clock Skew (ps)...................: 0ps


DRAM Performance Control
Performance Enhance...................: Turbo
Extreme Memory Profile (X.M.P.).....: DO NOT SEE THIS OPTION IN BIOS
(G)MCH Frequency Latch...............: Auto
System Memory Multiplier ..............:Auto 
Memory Frequency (Mhz) ..............: 1066
DRAM Timing Selectable ................: Auto

Standard Timing Control
CAS Latency Time........................7 Auto                    NOTE: I have the Crucial dimms installed and this is spec
tRCD .........................................7 Auto
tRP'...........................................7 Auto
tRAS..........................................24 Auto

Set all Suggested below to highest Values first.  Then later you can lower, one at a time, testing as you go

Advanced Timing Control
tRRD...........................................4 Auto
tWTR..........................................4 Auto
tWR............................................8 Auto
tRFC...........................................68 Auto 
tRTP...........................................4 Auto
Command Rate (CMD) ....................:0 Auto

Driving Strength Profiles
Driving Strength ............................Auto

Channel A
Static tRead Value.........................:10 Aoto
 tRD Phase0 Adjustment...................:0 Auto 
tRD Phase1 Adjustment...................:0 Auto
 tRD Phase2 Adjustment .................:0 Auto
 tRD Phase3 Adjustment..................:0 Auto
Trd2rd(Different Rank)....................:8 Auto 
Twr2wr(Different Rank)...................:8 Auto 
Twr2rd(Different Rank)...................:9 Auto 
Trd2wr(Same/Diff Rank)..................:9 Auto 
Dimm1 Clock Skew Control...............:Auto  
Dimm2 Clock Skew Control...............:Auto 

Channel B
Static tRead Value.........................:10 Auto
 tRD Phase0 Adjustment...................:0 Auto 
tRD Phase1 Adjustment...................:0 Auto
 tRD Phase2 Adjustment .................:0 Auto
 tRD Phase3 Adjustment..................:0 Auto
Trd2rd(Different Rank)....................:8 Auto 
Twr2wr(Different Rank)...................:8 Auto 
Twr2rd(Different Rank)...................:9 Auto 
Trd2wr(Same/Diff Rank)..................:9 Auto 
Dimm1 Clock Skew Control...............:Auto  
Dimm2 Clock Skew Control...............:Auto  

Motherboard Voltage Control

CPU
CPU Vcore….……….........................:1.25000V Auto

CPU Termination…..... 1.200V*.......: Auto

CPU PLL…………………....1.500V*.......: Auto

CPU Referen.…………....0.755V*.......: 0.760V Auto

CPU Reference2………,,0.800V*.......:I DONT HAVE THIS OPTION IN BIOS

MCH/ICH
MCH Core…………….....1.100V...........: Auto
MCH Reference….…….0.760V...........; Auto
MCH/DRAM Ref.…......0.900V...........:Auto
ICH I/O……………….....1.500V............: Auto
ICH Core…………...……1.100V............: Auto

DRAM
DRAM Voltage ……....1.800V............: Auto
DRAM Termination .…0.900V............: Auto
Channel A Reference 0.900V............: Auto
Channel B Reference 0.900V............: Auto

Advanced Settings
Limit CPUID Max. to 3.....................: Disabled
No-Execute Memory Protect............: Enabled
CPU Enhanced Halt (C1E)................: Disabled
C2/C2E State Support....................: Disabled
x C4/C4E State Support..................: Disabled
CPU Thermal Monitor 2(TM2) ...........: Enabled
CPU EIST Function.........................: Disabled
Virtualization Technology................: Disabled

Integrated Peripherals
Legacy USB Storage Detect ..............Disabled