DRAM Configuration >

Timing Mode:                  Manual
Memclock index value (MHz):   200
CAS Latency:                  3 
Min RAS# Active time (Tras):  8T
RAS# to CAS# delay (Trcd):    3T
Row precharge time (Trp):     3T
Row to Row delay (Trrd):      3T
User Config mode:             Auto
Bottom of 32-bit[31:24]:      IO D8  (greyed due to Auto setting)
1T/2T Memory timing:          1T     (greyed due to Auto setting)
Read Preamble value:          6ns    (greyed due to Auto setting)
Async Latency value:          6ns    (greyed due to Auto setting)
Enable all DIMM slots clock:  Enabled
S/W memory hole remapping:    Enabled
MTRR mapping mode:            Continuous


Voltage Settings >

CPU voltage:    1.500v
DDR voltage:    2.75v
Chip voltage:   1.500v
HT voltage:     1.20v