Search the Community
Showing results for tags '460x'.
Found 6 results
-
Hello! This is going to be a fairly long, and drawn out post... These circumstances are extremely uncommon as far as I'm aware. Any help on the subject is much appreciated. So I'm in a bit of a pickle here. I have the corsair 460x RGB case which comes with a built in button controller for the SP120 fans that are included, and up to 6 total fans. That's great and all... But the button controller severely limits your colour choice as well as the lighting options. I want to remove the button controller, and swap my system over to iCUE-based lighting. Where I run into one of my biggest issues, is that my H100i v2 cooler failed on me a couple years back, and I requested an RMA. That RMA went through but they did not have the H100i v2 in stock, but instead asked if I was okay with upgraded to the H100i RGB platinum. I am aware that the H100i V2 does not have RGB capable fans by default. So they were just normal SP120's, not the RGB variant. As for the coolers, they were both the same sized radiators, and same sized fans, so I thought nothing of it. Corsair support assured me that they would work in the same way as well. Wonderful! Free upgrade! Little did I know that the fans on the RGB platinum AIO are different than what comes with my case, they are the ML120 fans instead of the SP120 fans that my whole system was using at the time. I need a workaround, or just options in general, where I can combine both of these fans to get my RGB syncing properly. My original plan was to attempt to find a lighting node CORE (to replace the current built in RGB hub, and connect it to the motherboard for iCUE support), but it is not something that's available for purchase?? Because I cannot purchase the lighting node CORE, I feel as if I need another way to sync all 6 of my fans. I am also aware that the SP120 fans will not even work on the same RGB hub as my ML120 fans. How do I workaround this? Do I need to scrap my ML120 fans and purchase two additional SP120's? But then which RGB hub would I need to buy? I would love to buy the lighting node CORE, but it is not sold standalone as far as I can tell. It is always in bundles. Do I need to purchase a 3 pack of SP120 fans with a lighting node core included to get the core? As for the lighting node PRO, it always comes with at least 4 RGB strips as far as I can tell, pumping the cost up tremendously. I only have use for the lighting node PRO, which I would then connect to my 6(if I replace the ML120 fans) SP120 fans all which are plugged into the integrated RGB hub with the Corsair 460x RGB case. Sorry for the massive wall of text. I'm really struggling here in terms of adjusting my RGB for my case. I feel like it just gets exponentially more and more expensive for getting all my lights together. It especially hurts when I see the new 4000X case from corsair which by default has it all controlled via software. I wish I could buy that hub standalone, but once again I've looked to no avail. TL;DR: How can I swap the 460x RGB to a iCUE controlled (lighting-wise) system, with the ML120 fans in addition to the SP120's? -
This is just a quick feeler question. I currently have my h100i v2 front mounted in my 460x. I bought both because it's what my old build was, this one is just white, and wanted to have somewhat matching builds for my gf and I. However what I DIDN'T take into account was that my Corsair Vengeance RAM is taller than my old Ripjaws and so the radiator didn't fit on top like it did before. I(like many) do prefer a top exhaust radiator, and was wondering if anyone has, or if it is officially a TERRIBLE idea to mount the radiator to the vent holes on top vs the actual fan mounting points. I want to say only one half of the holes will actually be lined up incorrectly. Obviously this goes against the design of the case, and I have no idea if the metal for the vents is noticeably thinner/weaker than the mounting points. When I first put it together I "tested" it out and it IS possible, I just didn't go through with it because I didn't have time to get a second opinion(too excited to get it together the RIGHT way hahaha). So, no issues or is this a HORRIBLE idea?
-
Sehr geehrtes Corsair User Forum, Gestern mittag habe ich meinen PC gebaut mit dem Gehäuse 465x. Ich war gerade fertig und mit dem und wollte nur noch die Seitliche Glasscheibe einsetzen als sie grundlos einfach in meiner Hand explodierte. Ich hatte die Glasplatte fest in der Hand ich trage keine Ringe und wollte sie gerade ansetzen als sie einfach so und tausend Teile zersprang. Meine Frage ist wie ich jetzt damit umgehen soll. -Gibt es auf solche Teile eine Garantie? -Soll ich den Online Verkäufer informieren und dort einen Ersatz verlangen? -Wo bekomm ich eine ersatzt Scheibe ich konnte nirgendwo was finden. -Würde die Ersatz Scheibe vom 460x auch beim 465x passen. Vielen Dank schon mal im voraus, ich hoffe das mir jemand weiterhelfen kann. Die zerbroche Scheibe macht mir sehr zu schaffen.
-
Hi, Can anyone tell me if the thumbscrews sold here are compatible with the Corsair 460x case? https://www.corsair.com/uk/en/Categories/Products/Accessories-%7C-Parts/PC-Components/Cases/570x-thumbscrews-config/p/CC-8900102 Thanks Alex
-
I have a Corsair 460x RGB case and recently put my new pc parts in. Everything works fine with the PC itself, but i've been having trouble with the 3 front fans and the extra one I installed on the exhaust (all SP120.) The fans themselves are spinning as they're connected to the mobo, and the controller is connected to my psu, yet only the middle fan at the front is being lit up in green. The buttons on the controller dont work either. Any suggestions?
-
I have a Corsair 460x RGB case and recently put my new pc parts in. Everything works fine with the PC itself, but i've been having trouble with the 3 front fans and the extra one I added to the exhaust. The fans themselves are spinning as they're connected to the mobo, and the controller is connected to my psu, yet only the middle fan at the front is being lit up in green with the rest not being lit up at all.. The buttons on the controller dont work either. Any suggestions?
