Search the Community
Showing results for tags 'ax1200i'.
-
Can someone please assist me in choosing a cable so I don't let the magic smoke out of my PC. I have a Corsair AX1200i and would like to connect to a Nvidia P100. The card has a CPU 8 pin power. Any links would be appreciated.
-
Hello, i have a RM650 PSU and i need an extra sata power cable and a friend of mine has an AX1200i and is not using all of sata cables. I saw a lot of post and videos to not use modular cables from one PSU in another because they might not have the same pin layout. So i was wondering if AX1200i can work in my RM650.
-
Hello Corsair Team, My gaming rig has been working fine since I built it in 2021, and the las70 t time it powered on was Aug 23, 2022. Anyway, was playing Eurotruck Simulator 2 on this rig last tuesday and was working fine and shut down the computer like always. There was NO brownouts/sags and unit is also connected to an APC surge suppressor. When I turned it back on last saturday (Aug. 27.) It was not turning on. Then I disconnected all the cables and just powered on the AX1200i and pressed the self test button - that's the time when I saw the LED turn RED. disconnected the power supply cable, waited 15 minutes and tried it again, still the same thing - Self test LED is RED. I already have a case number: 2005511442, Not sure what else I can do at this point. Regards, -Mikee-
-
My PC has recently started turning off for no reason and then not wanting to post. I have narrowed it down to the dongle for the AX1200i. I have already done a full uninstall and reinstall of iCue - When I don't have the dongle plugged into the PSU it flashes red and green. - When I have the dongle plugged into the PSU with iCue installed, it flash red and green. - When I have the dongle plugged into the PSU and uninstall iCue it stays green. I'm running the following hardware on Windows 11 Pro fully updated to current releases/patches. iCue ver 4.26.110 - Dominator Platinum RGB 2x16GB Ram - AX1200i PSU - H150i Elite Capellix AIO - Strafe RGB MK.2 Keyboard - Two Xeneon 32QHD165 Monitors Any help is much appreciated to figure out why this is happening. Thank you.
-
Hey everyone, I recently purchased a refurbished Corsair AX1200i. Everything works fine but, unfortunately, it did not come with a Corsair Link cable which is the primary reason I purchased it in the first place (instead of just purchasing a new PSU). Is it possible for me to purchase a link cable from somewhere or is Corsair able to send me one? I live in Australia and I sent in a support ticket but its been over a week with no response. I still have my RM750i with all cables and accessories (including the two link cables that came with it) but the RMi has a miniUSB port with an optional analogue port. The AXi only has a analogue port for Corsair Link which the RMi analogue cable cannot directly connect to the internal USB header through. I understand this is what I need but have no way of purchasing it even if it was in stock: AX 1200i/860i/760i USB to i2C adapter (corsair.com) This is my first time posting to the forums so please let me know if there are any issues or require more information.
-
PSU is Corsair AX1200i. Is this situation from topic title normal? Shoud fan always spin on self-test button pressed? I run self test while only 230v power cable connected to PSU. No any other cables connected. PSU lies on dielectric wooden clean office table. P.S. I know instructions manual says fan should spin on self-test button pressed, but why test status LED shows green light then if fan failed to spin on start? It is obviously not "green" situation.
-
Hi folks, Recently purchased a used AX1200i without the original usb-i2C adapter (dongle) https://www.corsair.com/us/en/Categories/Products/Accessories-%7C-Parts/PC-Components/Power-Supplies/AX-1200i-860i-760i-USB-to-i2C-adapter/p/CP-8920019 and unfortunately, Corsair support claimed the 1200i, quoted, 'has turned into a discontinued product and due to this reason, some spare parts are not for sell any more', and asked me to look on ebay, which I have no luck finding one. My question, if the dongle is intended to act as an Analog-digital convertor, will the 'CORSAIR Link Analog to Digital Bridge Cable for RM Series' work for the AX1200i through the comm port? https://www.corsair.com/ca/en/Categories/Products/Accessories-%7C-Parts/PC-Components/Power-Supplies/CORSAIR-Link-Analog-to-Digital-Bridge-Cable-for-RM-Series%E2%84%A2-PSU/p/CP-8920119#tab-faqs Many thanks. Felix
-
Hi, I could not be 100% sure if the original cable between PSU HX1000 platinium ( 2021 model) and AX1200i ( 2013 or 2014) can be swapped safely. From compatibility corsair chart all type 3 and type 4 cable except 24 pin seems to be compatible. - However for Molex/4 pin, the pinout seems different (see picture attached). why original cable between HX1000 and AX1200i can be swapped with different pinout? - PCIE/sata the pinout are the same so can they be swapped? Thank you
-
Hello - So, brand new system on newly installed Win10x64. Has been running fine for a couple of weeks through various stress tests etc, until a long file copy operation. Transferring around 1/2 TB from an internal Nvme (Raid0) to a pcie card Nvme takes about 3 1/2 hrs. During this process got the red light shutdown. Tried one more time, and same thing. It is obvious I'm not the only one, eg. the thread here: (https://forum.corsair.com/v3/showthread.php?t=186076) What I don't get, is why a low power operation (was consistently taking 14/5 A on 12/5 V) during the copy with no other high power operations running, should trigger the OCP, especially since hours of stress testing caused no problems. Anyway, I ran the file copy again on single rail and it ran fine. So, I guess I'm asking whether I should RMA? One of the reasons I went for this PSU was its (supposed) ability to run OCP on the individual rails. Another thing that seemed strange, was the Link software reports the Firmware as N/A. What does this mean?? There is no firmware?! There is firmware, but Corsair does not know what it is?!? Joking aside, is it possible to update firmware, and is the N/A normal? Thanks. [Off Topic Explanation: Some might wonder why the file copy takes so long, given the hardware involved. The answer is Backup4All - I got it years ago when the single threaded operation didn't really matter. It does now, yet it seems the company still sell their 1 thread software. I wish I could find a reliable multi-threaded file backup prog. but when I've tried they all messed up the incremental backups - except Backup4All]
-
Hi Team, I had an AX1200i which has been replaced with a DoA ax1200i and then replaced with an AX1500i however the new 1500 now has the same issue as the original AX1200i - it has a long beep that wont go away until reset of the power. video of noise here. https://streamable.com/30zyfz I would like to know why this is happening. I have escalated for my support ticket to get resolved again however understanding the nature of the fault would be appreciated.
-
Like I said in the titel, I installed this PSU, and when it is nor connected, the self-test passes (green light, fans spins) but as soon as I connected the MB to the psu, when I start the PC it comes green for 1/2 second than red and nothing moves. Is there a way to test the psu (other than self-test, obviously) ? I have an ASUS P8Z77-V LX as MB Many thanks Simon
-
Soo I got an AX1200i long time ago and it worked great, then after a few months it started to give the typical issue of the red light and random shutdowns, so I got a replacement from amazon. The 2nd unit had the same issue or even worse, it wouldn't turn on again. I returned the 2nd one and got a ROG Thor 1200W and it had no issues but I didn't liked it that much, so I returned it and again I wanted the AX1200i badly, so I bought it. And here I am with the 3rd unit and the same issue. I tried setting a manual fan speed, changing between Single or multi rail modes, and many more fixes that people suggested here in the forums or google. What should i do? There is a fix for this? Return it and get a HX1200i, as i heard they don't have this issue?
-
Do I get the Gen 3 or Gen 4 kit? Do I need to mix and match cables for full compatibility?
-
Hello, I've had my ax1200i for 3 years now, it's been working great until a few days ago. After I use my computer for a bit my PC shuts off then my PSU shows a red light. I hold the power button on my computer to completelty shut it off, I then try to turn it back on, but it only turns on for a second then my PSU immediately goes to a red light. Once again I turn it off completely, I let my PC sit off for a few minutes, then when I power it back on my PSU works normally showing a greenlight, but after a while of using it my PSU goes back to red. I'm not really good with computers, so if I had to take it apart completely to troubleshoot I would be lost.
- 2 replies
-
- ax1200i
- power supply
-
(and 1 more)
Tagged with:
-
Hello, For months my system has been working fine with no issues whatsoever! In terms of hardware nothing has changed since but this evening, all of a sudden the entire systems powers off out of the blue. :mad: Then I attempt to power on again, it does nothing. Power off the PSU at the switch for a minute and on again, then powering up the system, the PSU Immediately goes to off, and the red light shows again. Pressing the self-testing switch does nothing, the indicator remains red. Now I've tried a different PSU in my system, to help debug but that seems to work fine. No sudden power-downs or anything, I can play games for hours without any issues. So I assume this AX1200i has also died? Shame, it was originally shipped to me as a replacement for the older AX1200 which also died.. :eek: Now, since your support system has changed, I don't know how to check how much warranty is remaining. Is this possible? I login to my profile but there's no details of me ever opening a previous RMA or anything..
- 5 replies
-
- ax1200i
- faulty psu
-
(and 1 more)
Tagged with: