Title pretty much says it. I have had this cooler on my previous build, the only difference was I used a Commander Pro with my B-450 F motherboard. My commander pro shorted out, so the only differences with the new build is a new case, new motherboard (Asus X-570) and new EVGA power supply.
Upon booting, my rgb fans immediately turn red and start spazzing out, running at full speed. Going in to the BIOS, I see that my CPU is running at 90C, or around 200 degrees F. I've tried reapplying thermal paste, making sure no pins are bent, fans are hooked up to the correct headers, and switching SATA power cables.
I'm a bit confused on the cable layout. When I had my Commander Pro, I had all 6 of my fans, including the 2 radiator fans for the AIO plugged into it. Since it shorted out, I have hooked up my two radiator fans to the CPU_FAN and CPU_OPT headers on my X-570. The 3 pin power connector I have hooked up to the AIO_PUMP header, the Sata connector to the power supply, and the USB 3.0 cable to the bottom of the motherboard. Do I need another commander pro? Do I need to hook the fans up to the headers attached to the pump itself (Tried this and the fans didn't spin)? I'm going to try switching to the stock AMD Wraith cooler tonight if nothing else works. Any help would be appreciated. Thanks!