krazykid Posted May 5, 2016 Share Posted May 5, 2016 [ame] [/ame] Instructions seen in video: - Search online for Notepad++ and download + install it - Find a profile you want to convert - Right click the PRF file on your desktop and you should see an option "Edit with Notepad++" - Once inside press CTRL + F - Find and replace Find: current model tag of the profile Replace: tag of the model you want to convert to - Press Replace All Your done! Keyboard Model Names (THESE MUST BE IN CAPS LIKE SEEN BELOW): CGK65 RGB K70 RGB K95 RGB STRAFE RGB K70 LUX RGB K65 LUX RGB K70 RGB RAPIDFIRE K65 RGB RAPIDFIRE Link to comment Share on other sites More sharing options...
Corsair Employees Corsair Henry Posted May 11, 2016 Corsair Employees Share Posted May 11, 2016 Great video! Thanks for making this Link to comment Share on other sites More sharing options...
Corsair Employees Corsair James Posted May 11, 2016 Corsair Employees Share Posted May 11, 2016 Can you also do a step by step instruction in text? Link to comment Share on other sites More sharing options...
krazykid Posted May 12, 2016 Author Share Posted May 12, 2016 Can you also do a step by step instruction in text? Yea sure ill get to it:) Link to comment Share on other sites More sharing options...
krazykid Posted May 14, 2016 Author Share Posted May 14, 2016 Added a step by step instruction below the video. Link to comment Share on other sites More sharing options...
sbaileyou12 Posted May 21, 2016 Share Posted May 21, 2016 also the models are case sensitive, so type the model name in all caps or else it will not work. Link to comment Share on other sites More sharing options...
krazykid Posted May 22, 2016 Author Share Posted May 22, 2016 also the models are case sensitive, so type the model name in all caps or else it will not work. Good point, i'll put that up. Link to comment Share on other sites More sharing options...
Tiberius94 Posted May 28, 2016 Share Posted May 28, 2016 Do you guys have any ideas on why it might that when I go to import a profile, it doesn't pull in any lighting modes? I am able to see files under the actions and lighting tabs, but under the profile tab there is nothing besides default for a mode. All that seems to do is shut off the backlighting. Even editing each profile before importing it doesn't seem to do the trick. EDIT: Looks like I was finally able to get it to work. Just had to look at it for a 3rd time and realized what I was missing. Link to comment Share on other sites More sharing options...
Pola Posted June 18, 2016 Share Posted June 18, 2016 What was it that you were missing? Im still having trouble Link to comment Share on other sites More sharing options...
appleofmydroid Posted August 18, 2016 Share Posted August 18, 2016 What was it that you were missing? Im still having trouble hey do you have your mode in cue software set to advanced? in the top right corner click it from normal to advanced that should fix it Link to comment Share on other sites More sharing options...
Urbanito Posted August 23, 2016 Share Posted August 23, 2016 On my keyboard after this convert it still doesn't work. Link to comment Share on other sites More sharing options...
larsiano Posted September 1, 2016 Share Posted September 1, 2016 Instructions seen in video: thanks for the tip this saves a lot of time Link to comment Share on other sites More sharing options...
Bizzenson Posted December 27, 2016 Share Posted December 27, 2016 hey do you have your mode in cue software set to advanced? in the top right corner click it from normal to advanced that should fix it Thank you so much for this simple, yet effective tip. I have a K70 RGB Rapidfire and this did the trick! Gee, how neat is that! :sunglasse Link to comment Share on other sites More sharing options...
krazykid Posted February 22, 2017 Author Share Posted February 22, 2017 Anyone still using CUE 1? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.