zstoichev Posted November 18, 2018 Share Posted November 18, 2018 Hello, Just upgraded from FX8350 to Ryzen 2700X and H115i does not show correct Temp anymore. It is always around 30`C, even in high cpu load. See it on idle: See it on load: I have noticed this as my Lightening settings based on H115 temp didnt react on the load. What I should do to fix this? BR Link to comment Share on other sites More sharing options...
DevBiker Posted November 18, 2018 Share Posted November 18, 2018 That looks like the coolant temperature, not the CPU temperature. It does react to load but it's slow - the liquid as a much higher specific heat than the CPU or air. Also, if your ambient environment is sufficiently cool and your fans are already going full on, it may be shedding the heat just as fast as your produce it (which isn't a bad thing, btw). Link to comment Share on other sites More sharing options...
Pocah Posted November 19, 2018 Share Posted November 19, 2018 Yes it looks like Coolent Temperature there, which doesn't vary much. You should link your LEDs to CPU temp, not Coolent Temp. Link to comment Share on other sites More sharing options...
zstoichev Posted November 19, 2018 Author Share Posted November 19, 2018 So it is normal to be like that? I am just worried its broken, because CPU temp changes from 35 to 65-70, and coolant varies just a couple of degrees, the most. Link to comment Share on other sites More sharing options...
DevBiker Posted November 19, 2018 Share Posted November 19, 2018 Yup, completely normal. Liquid as a much higher heat capacity than the processor or air. And you don't want your liquid getting that warm ... but, instead, be able to release the heat before it builds up. Link to comment Share on other sites More sharing options...
Mussels Posted November 20, 2018 Share Posted November 20, 2018 Could you post a bigger screenshot? It almost looks like you've posted the ram temperature and not the CPU Water temp reads lower than CPU temp for sure, with my 2700x i'm seeing about a 30-40C difference... i'm honestly not sure if thats a problem or not, as the chip runs fine Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.