Varyak Posted October 20, 2018 Share Posted October 20, 2018 Hi everyone, I have the mentioned H115i Pro installed in the top of a Lian Li PC-O11 Dynamic. Sadly the screw heads are a little to big to close the top cover with the dust filter. Now I am wondering if there are some kind of flat headed screws I could use instead. I can't seem to find useful information about the screw sizes needed. Do any of you have the information or know about flat headed screws? Thanks! Link to comment Share on other sites More sharing options...
c-attack Posted October 20, 2018 Share Posted October 20, 2018 You can use any 6-32 machine screws. Local hardware store should be overflowing with them. Link to comment Share on other sites More sharing options...
Varyak Posted October 21, 2018 Author Share Posted October 21, 2018 I suppose you don't know the metric/EU equivalent? Link to comment Share on other sites More sharing options...
c-attack Posted October 21, 2018 Share Posted October 21, 2018 Typically M3.5 with a max length of 30mm. Obviously the fan is 25mm thick so it needs to be more than that. If you feel like the 30mm is going to be just a little too long, throw some rubber washers down to keep the screw tip further away from the radiator fins. I don't use them very often, so if someone else who does has suggestions, but all means... You may still be able to find UNC 6-32. It necessary for some things. You could likely also order them from a PC specialty store, although surely at a premium for the lavish black paint. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.