PokerFan Posted July 22, 2018 Share Posted July 22, 2018 Just received the case today, it's gorgeous! I also have an additional 3 LL120's to go with the case as well. I'm planning on having the h150i in the front with fans configured as an intake. I also plan on having the 2 top fans as intakes to get fresh air in the case, and lastly an exhaust with my radiator for my video card attached to it in the rear. Does this sound like a good config or should I change some stuff around? If I do upgrade to the next gen nvidia cards and end up with an air-cooled card should I change the config? Link to comment Share on other sites More sharing options...
Corsair Employee Corsair StormShadow Posted July 24, 2018 Corsair Employee Share Posted July 24, 2018 You should configure the top as exhaust (hot air rises up) and the rear can be an intake as well as the front. Link to comment Share on other sites More sharing options...
Zotty Posted July 24, 2018 Share Posted July 24, 2018 Given this case is very similar to the 570x, I would be tempted to run it positive pressure, so front and tops as intake and rear as exhaust.. all intakes will be filtered which will cut the dust down massively as well as the top fans cooling down the air coming from the H150i before it gets to your ram/cpu/gpu... I run my 570x this way with the same cooler and it works well :). Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.