Jump to content
Corsair Community

"Corsair Force Series 3 60 GB" BSOD and Locked System


dj_tallboy

Recommended Posts

Hello,

 

I have a problem since I attached a SSD (Corsair Force Series 3 60 GB) in my computer.

 

First days, I couldn't install Windows 7. Then, I changed SATA connections and it worked.

 

Now, my SSD is running in AHCI mode. However, my system often gets what appears to be random freezes where the only functional thing is the mouse. And after a while it ends in a kernel_data_inpage_error BSOD.

 

http://img217.imageshack.us/img217/3633/windowshatassd.jpg

 

When the PC reboots it fails to find any of my hard drives. So I shut it down for a minute and reboot it, where it then successfully boots into Windows.

 

I updated my mainboard Firmware.

I updated BIOS.

I updated my AMD Chipset driver.

I updated AMD AHCI drivers.

and I updated Corsair Force Series 3 60 GB Firmware from this title (But, Firmware is not 1.3.3. I can't update to 1.3.3. SSD Firmware is still 1.3 because of the problem in the figure below).

 

http://img841.imageshack.us/img841/7273/ssdupdateissue.jpg

 

I chose the file "22790" to update, but I got this problem. What may be the cause? When I searched for my problem, I saw SandForce can cause locks in a system, SSD disappear and BSOD. I guess, I must update to last firmware.

 

I still get BSOD and my system freezes randomly, then I am obliged to restart. Please help me ! :(

 

System spec:

 

Windows 7 Ultimate 64-bit, Service Pack 1

Gigabyte MA770T-UD3P (not include SATA III)

AMD Phenom II X4 965 3.40 GHz

4096MB DDR3 RAM

ATI HD5770

Corsair Force Series 3 60 GB (OS disk)

Samsung HD103SJ SATA 1 TB

Link to comment
Share on other sites

-Tried a different SATA port?

-Tried a different SATA cable and power connector?

-Uninstall all your AMD AHCI drivers and use the generic Microsoft drivers. Then try updating the SSD firmware.

 

If it did not work, Try updating it on a different system.

Link to comment
Share on other sites

-Tried a different SATA port?

-Tried a different SATA cable and power connector?

-Uninstall all your AMD AHCI drivers and use the generic Microsoft drivers. Then try updating the SSD firmware.

 

If it did not work, Try updating it on a different system.

 

I changed SATA cable and uninstall AMD AHCI. SSD firmware is 1.3.3 now !

 

Thank you very much !

 

I hope my problem is solved :)

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...