TheJacks_ Posted August 10, 2018 Share Posted August 10, 2018 Hi all, I’ve just received this case and cannot seem to get the led light bar on the front panel to work. The 2 provided fans are working though. Does the front panel led strip have a different or separate connection cable? What am I missing here? The user manual isn’t helpful.. Thanks in advance! Link to comment Share on other sites More sharing options...
andy661166 Posted August 11, 2018 Share Posted August 11, 2018 I'm not able to get either my fans or my strip to work. Built today but the RGB function doesn't seem to be working. Fans run but can't get them to light :bigeyes: Link to comment Share on other sites More sharing options...
Krokarn Posted August 12, 2018 Share Posted August 12, 2018 The case cames prodivded with a Lightning Node PRO and a Led-hub. TThe fans rgb-cables is conected to the led-hub and the led light bar is conected directly to the Lightning Node PRO. You need to connect sata-power from your Power-supply and then one usb-cable to internal usb at the motherboard. In iCUE you will not see your LNP(Lightning Node PRO) but you will se SPEC OMEGA RGB instead were you adjust your RGB-Lightning. Link to comment Share on other sites More sharing options...
TheJacks_ Posted August 12, 2018 Author Share Posted August 12, 2018 I figured it out! Besides the USB power connector and the SATA power cable, you also need to plug in the SECOND SATA power cable (which is tied next to the SATA cable that says "SATA Power"). So 3 cables need to be plugged-in in total. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.