First Blood Posted April 6, 2018 Share Posted April 6, 2018 Hi! first post!! ;) I have 2 DIMM's 16GB*2 LPX 3200 16 18 18 36 with missing resistors if thats what they are called, please see pic, but the ram still works 100%, passes memtest, prime95, real bench, etc. Corsair tech agent didnt know what these resistors do but said if they do cause problems then they can look into a replacement, perhaps anyone on this forum might know something about these resistors and if its safe or not safe to continue to use them. Also my other issue is that I have a total of 128GB 16GB*8 with Asus Rampage 5 motherboard but I cannot run the ram at its full 3200mhz speed. I settled at 2666 13 14 14 33 T1 44x core and 40 cache and system pass all testing 100%. Anyone know how to get this much memory to run at 3200? Perhaps this motherboard cannot support this much ram at 3200, it works perfectly fine with 64gb @ 3200 and I dont think it would be the missing resistors on the 2 dimms preventing the ram to run at its full speed. Thanks! Link to comment Share on other sites More sharing options...
Corsair Employee Corsair Art Posted April 9, 2018 Corsair Employee Share Posted April 9, 2018 For the resistors, I have not gotten a response back from the appropriate person. For the speed, we can only guarantee you'd be able to reach that higher frequency while using 1 kit. -Art Link to comment Share on other sites More sharing options...
First Blood Posted April 13, 2018 Author Share Posted April 13, 2018 For the resistors, I have not gotten a response back from the appropriate person. For the speed, we can only guarantee you'd be able to reach that higher frequency while using 1 kit. -Art Thanks Art please let me know as soon as you do find out. I am using the ram in my system right now and seems everything is ok but when I touch the ram they do seem a bit warmer than the other dimms. But that could also be caused by temps from other components. Thanks! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.