Chiller Posted October 16, 2010 Share Posted October 16, 2010 This build is made possible by and thanks to Aquatuning http://www.aquatuning.de/bilder/banner/468x60_eng.gif Xtreme Case Mods http://i56.tinypic.com/2ijmfky.jpg IT-Service http://i56.tinypic.com/14w6oli.jpg Cooler Master http://i55.tinypic.com/302p7bq.jpg Zetix http://i56.tinypic.com/2qnd0ux.jpg so i will tell something about myself i'm from belgium, and like to bench, but done a hole year nothing, last year in december i was 49th of the world on hwbot, now with the big update i dropped to 240th place or so. so now is it time to get the cpu pot and dewar for ln² out of the dust and get some more points back first here are some pic of my rig at the moment that needs to be finished first : http://i49.tinypic.com/2u6e5wo.jpg http://i49.tinypic.com/2rwnxpf.jpg http://i49.tinypic.com/2u8w7wh.jpg http://i50.tinypic.com/30vhvgh.jpg http://i50.tinypic.com/15wnipt.jpg http://i47.tinypic.com/ixthug.jpg http://i50.tinypic.com/dvka5k.jpg also needs some red led's in it : http://i45.tinypic.com/27y5ugj.jpg http://i50.tinypic.com/1zeea1v.jpg http://i48.tinypic.com/15oiek8.jpg http://i50.tinypic.com/1628hty.jpg Drivebay with a sata cable with red neon : http://i47.tinypic.com/denzmc.jpg http://i45.tinypic.com/27y5ugj.jpg http://i30.tinypic.com/33p4jm8.jpg http://i31.tinypic.com/2uzyqrp.jpg http://i25.tinypic.com/4ibz4j.jpg Boreas chiller : http://i27.tinypic.com/2mq517n.jpg http://i30.tinypic.com/124h9pu.jpg http://i28.tinypic.com/1y5lza.jpg http://i25.tinypic.com/2v0lqpc.jpg http://i45.tinypic.com/27y5ugj.jpg http://i30.tinypic.com/23wwv1f.jpg http://i26.tinypic.com/2cqjne8.jpg http://i45.tinypic.com/27y5ugj.jpg http://i25.tinypic.com/2z9csxv.jpg http://i28.tinypic.com/8ql4.jpg http://i45.tinypic.com/27y5ugj.jpg http://i25.tinypic.com/2vt60cn.jpg http://i32.tinypic.com/orl3rl.jpg http://i29.tinypic.com/2q3q1ht.jpg http://i45.tinypic.com/27y5ugj.jpg http://i31.tinypic.com/2ef5ocy.jpg http://i31.tinypic.com/29ehhnc.jpg http://i32.tinypic.com/2cda4vt.jpg http://i45.tinypic.com/27y5ugj.jpg http://i31.tinypic.com/sxi0zb.jpg http://i28.tinypic.com/se8tjb.jpg http://i29.tinypic.com/21bu986.jpg http://i29.tinypic.com/34parg2.jpg http://i45.tinypic.com/27y5ugj.jpg http://i26.tinypic.com/34zy8ec.jpg http://i26.tinypic.com/2ed5rug.jpg http://i32.tinypic.com/2ibkt1i.jpg http://i32.tinypic.com/148hgro.jpg http://i31.tinypic.com/jg5buq.jpg get my custom plexiglas i let make at the lasercutter, new pics will follow tomorrow : http://i29.tinypic.com/6yfvcj.jpg http://i45.tinypic.com/27y5ugj.jpg http://i38.tinypic.com/255uibd.jpg http://i34.tinypic.com/2cducko.jpg http://i35.tinypic.com/2dr8dx4.jpg http://i33.tinypic.com/2mrbb5j.jpg http://i35.tinypic.com/2r7bkwp.jpg http://i45.tinypic.com/27y5ugj.jpg change the power for the led's in the Corsair HX1000 psu what i made see tru, and put the first led's in the 5mm fan shroud for the boreas chiller : PSU http://i37.tinypic.com/13ypl4y.jpg http://i37.tinypic.com/34i5szr.jpg De Boreas Chiller : http://i37.tinypic.com/30mmq8h.jpg http://i38.tinypic.com/e8scxs.jpg http://i38.tinypic.com/2yxgh3m.jpg http://i36.tinypic.com/2d8qo9y.jpg http://i38.tinypic.com/1588e3k.jpg the boreas chiller is finished, no to the Freezone Elite and Freezone V1. : new TEC plates in tha house, so now i can finish the Freezone V1 cooler : http://i36.tinypic.com/efgld2.jpg http://i34.tinypic.com/5nqky8.jpg http://i33.tinypic.com/t657pv.jpg the psu painting in black , de ******** for the TEC's : http://i34.tinypic.com/5ufznb.jpg http://i34.tinypic.com/a9pbpf.jpg http://i45.tinypic.com/27y5ugj.jpg the Coolit Boreas is finished, now the dual bay psu and the rest of coolers : http://i38.tinypic.com/8y6opl.jpg http://i37.tinypic.com/f57uy8.jpg http://i37.tinypic.com/2ihw7yx.jpg http://i36.tinypic.com/14brte9.jpg De ******** dual bay psu is also finished, pianted outside black, and inside silver for putting the light nice out, only the psu front i need to put back : http://i33.tinypic.com/2vimssi.jpg painted because it looked like this in gold : http://i35.tinypic.com/33p3nr9.jpg video with how it looks all now : psu with the front plate ready : http://i33.tinypic.com/qx2v0n.jpg http://i38.tinypic.com/2saf8na.jpg FuFuFuFuFuFuFuFu TMS-200 with expansion board with connectors from UK : http://i36.tinypic.com/5xiy3n.jpg http://i36.tinypic.com/23j63nr.jpg FuFuFuFuFuFuFuFu TMS-200 with expansion board modding : http://i36.tinypic.com/5xiy3n.jpg http://i36.tinypic.com/23j63nr.jpg http://i38.tinypic.com/wlw4xv.jpg I got some connector to short, need to order more http://i34.tinypic.com/230101.jpg Link to comment Share on other sites More sharing options...
Chiller Posted October 16, 2010 Author Share Posted October 16, 2010 http://i45.tinypic.com/27y5ugj.jpg today i customized the 3D fangrill so it fits on my Coolit Boreas Chiller : This was how it looks standard : http://i36.tinypic.com/2n0ltuq.jpg And after the adjustment, who see the difference ???? lol :tong: http://i35.tinypic.com/w9f8qp.jpg http://i35.tinypic.com/1zqvg3s.jpg And this is how it going to fit in black and red on the Chiller : http://i38.tinypic.com/rif8zb.jpg http://i37.tinypic.com/op6wph.jpg http://i45.tinypic.com/27y5ugj.jpg MAt Black acryl bended with a heatgun, for detail for the Boreas chiller on the HDD bays. http://i38.tinypic.com/zlzxty.jpg now waiting to receive the mobo hopefully this week, or at last beginning next week. Also a nice toy for OC, the Evga EVbot. The motherboard (hopefully this week) Mobo SR-2 link info http://i34.tinypic.com/30hpjs9.png Nice toy for OC on the mobo : EVbot link info http://i35.tinypic.com/2i0dkd2.jpg http://i36.tinypic.com/2i29avo.jpg Only problem is that the case needs a big adjustment for fitting the mobo in the case, but it will work how i whant it. i can also use a backplate likes this, but i will keep the original backplate of mobo, but adjust it : http://i33.tinypic.com/24qs7xi.jpg If you look at the sizes of the Classified ATX mobo (30.5 x 26.4cm) against a SR-2 E-ATX (34.6 x 38cm) : http://i37.tinypic.com/25hzsk7.jpg the case will need some adjustments lol. http://i45.tinypic.com/27y5ugj.jpg Mounting for the Boreas Chiller made, was first the HDD trays. Now made mat black acryl with behind the mounting plates for the boreas chiller. And still need to finish it nice off and put holes for the cables of the boreas : http://i52.tinypic.com/2ec3zba.jpg http://i51.tinypic.com/2ns5g2g.jpg http://i56.tinypic.com/1z6ckmh.jpg the koolanc controller has new connectors, now only small smd-led's in it for some red light and it is finished http://i52.tinypic.com/ne84k6.jpg now i have 1 koolanc flowsensor, atx power and the internal usb done : http://i51.tinypic.com/10x982v.jpg http://i55.tinypic.com/2rohoap.jpg http://i55.tinypic.com/2rqim9f.jpg http://i53.tinypic.com/154a6uq.jpg i made already last night some modifications to the tray to fit the mobo, but the case also needs some modification, and the box to close it over the mobo, needs to be bigger also. i just can't get it closed completly, look at the pic good : http://i54.tinypic.com/103spd3.jpg http://i45.tinypic.com/27y5ugj.jpg very small update, making little adjustments on the fan for a little more airflow. this is how it looked after i changed the outside : http://i35.tinypic.com/w9f8qp.jpg a first little piece is changed, tomorrow will be more : http://i53.tinypic.com/dqpzy1.jpg and this is what we going to change : http://i54.tinypic.com/2qipgef.jpg Here's the 3d fan grill in primer with the adjustments for a little more airflow, ready to sand again : http://i54.tinypic.com/2q0u77r.jpg http://i45.tinypic.com/27y5ugj.jpg the mounting for the Boreas chiller is ready exept for the holes to put the wires and tubing tru : http://i55.tinypic.com/106gep5.jpg fan grill got it first paint job , is get dry now : http://i55.tinypic.com/2ia3ddj.jpg and the front plate for the drive bays has a primer : http://i54.tinypic.com/2n8wu9y.jpg and first paint job in mat black (just fresh, needs to dry) : http://i55.tinypic.com/6zr2wi.jpg Link to comment Share on other sites More sharing options...
Chiller Posted October 16, 2010 Author Share Posted October 16, 2010 front plate drive bays : http://i55.tinypic.com/155i1ox.jpg http://i53.tinypic.com/atqm3p.jpg cpu are in ta house !! even the same batch number batch, matched pair http://i52.tinypic.com/2nsye.jpg http://i56.tinypic.com/2627io2.jpg http://i45.tinypic.com/27y5ugj.jpg Little update, Coolit Freezone Elite is ready to and cpu's are on the mobo , And here are some pics of the total view : http://i55.tinypic.com/nccies.jpg http://i53.tinypic.com/4hwh6o.jpg http://i51.tinypic.com/2nq4k8y.jpg http://i55.tinypic.com/24osj8l.jpg Link to comment Share on other sites More sharing options...
Chiller Posted October 16, 2010 Author Share Posted October 16, 2010 http://i45.tinypic.com/27y5ugj.jpg today i sleeved the cables for the Evga EVP OC Panel V3, Also the flat ide cable etc And made a cable to extend the Connector from the motherboard EVbot in the IO-Shield to the front of the pc : enjoy the pics : http://i1210.photobucket.com/albums/cc419/chiller2/20100924_002.jpg http://i1210.photobucket.com/albums/cc419/chiller2/20100924_001.jpg http://i1210.photobucket.com/albums/cc419/chiller2/20100924_003.jpg http://i1210.photobucket.com/albums/cc419/chiller2/20100924_008.jpg Here you see the difference between the Classified ECP Panel, and the SR-2 ECP Panel V3 : http://i1210.photobucket.com/albums/cc419/chiller2/20100924_009.jpg Extending cable for the EVbot : http://i1210.photobucket.com/albums/cc419/chiller2/20100924_004.jpg http://i1210.photobucket.com/albums/cc419/chiller2/20100924_005.jpg Also did some cables of the coolit coolers and the Psu for it, the thermaltake Dual bay 650w psu : http://i1210.photobucket.com/albums/cc419/chiller2/20100924_001-1.jpg Enough MDPC-X sleeving (few hondred meters) ? http://i1210.photobucket.com/albums/cc419/chiller2/20100924_002-1.jpg changing the connecting on my mobo in 90° angle : http://i53.tinypic.com/712.jpg http://i54.tinypic.com/x4os4.jpg allmost finished, just have to make it nice : http://i52.tinypic.com/6z5x80.jpg http://i51.tinypic.com/b7maea.jpg http://i55.tinypic.com/n34xe1.jpg http://i55.tinypic.com/2q1urs4.jpg http://i52.tinypic.com/sp90tx.jpg Two koolance 360 rev1.1 , and koolance SR-2 Classified full cover block are arrived : http://i54.tinypic.com/33ud4it.jpg http://i54.tinypic.com/2ly64ap.jpg after received it, let's open up the full cover block SR-2 and change it a little bit : http://i53.tinypic.com/2gv6bye.jpg a lot of sanding it to get the nickel of it, and then the first layer of primer : http://i53.tinypic.com/21k9mr4.jpg http://i56.tinypic.com/10idipw.jpg Link to comment Share on other sites More sharing options...
Chiller Posted October 16, 2010 Author Share Posted October 16, 2010 http://i45.tinypic.com/27y5ugj.jpg first layer mat black is on, tomorrow sanding it and paint it the last time for finishing touch, after when it's dry mount the block again and put it on the motherboard : http://i52.tinypic.com/6pymfn.jpg http://i55.tinypic.com/zjzb4i.jpg http://i54.tinypic.com/2ze9fee.jpg SR-2 full cover block is ready and mounted : http://i55.tinypic.com/dq5e1j.jpg http://i54.tinypic.com/14dd72e.jpg http://i52.tinypic.com/5xk01c.jpg http://i55.tinypic.com/2d7ikpy.jpg Now i'm again doing little sleeving, and this week making also the 90° angle for the cpu power connectors. And making a new motherboard cover of the case, it needs to be bigger (bigger mobo then normal fit the case) pics of what i did today : from this : http://i51.tinypic.com/2ntbxwl.jpg i made these, and a little bit more, only waiting for a new shipment of red connectors : http://i55.tinypic.com/20r8dxz.jpg received package with connectors : http://i55.tinypic.com/p883s.jpg http://i52.tinypic.com/70ciz7.jpg i made this, and have to make more of them for the other cpu and vga power on mobo : http://i53.tinypic.com/w0osw5.jpg http://i53.tinypic.com/2utjn1w.jpg http://i51.tinypic.com/1xxjki.jpg http://i53.tinypic.com/1zwytqb.jpg http://i51.tinypic.com/2eur3vk.jpg http://i55.tinypic.com/4uann6.jpg and for the 90° corner of mobo has his place, tru the wall behind the Boreas Chiller, and also the tubing for the little isolated reservoir : http://i51.tinypic.com/2a5hbvs.jpg http://i52.tinypic.com/2u7lj88.jpg http://i52.tinypic.com/2ry66va.jpg Link to comment Share on other sites More sharing options...
Chiller Posted October 16, 2010 Author Share Posted October 16, 2010 http://i45.tinypic.com/27y5ugj.jpg The other cpu his power cable is also done, and the PciE cable also : http://i52.tinypic.com/11c48sp.jpg http://i52.tinypic.com/211qye1.jpg http://i51.tinypic.com/2nkub01.jpg Total overview of the powercables on the motherboard, the green circle is where the cables leave the case to the other side for connection to the powersupply : http://i56.tinypic.com/adyh61.jpg Link to comment Share on other sites More sharing options...
Chiller Posted October 16, 2010 Author Share Posted October 16, 2010 http://i45.tinypic.com/27y5ugj.jpg new parts in : Evga SR-2 1200w (peakload 1700w) psu Due to U.S. regulation, power draw over a typical household 110-volt AC line limits the PSU-1300ATX-12N to 1300W. However, the unit is fully capable of a continuous 1700 watts when powered from a 220V AC circuit. Users are responsible for supplying adequate AC power for the PSU-1300ATX-12N. http://i55.tinypic.com/24phw0z.jpg http://i54.tinypic.com/ayqzv4.jpg PciE connector for GPU's with a 2200UF (MicroFarad) condensator and ferrit-cores : http://i53.tinypic.com/33d9jqe.jpg Cpu ATX power connectors, also with 2200UF (microFarad) Condensator and ferrit-cores : http://i56.tinypic.com/20j304i.jpg and te best part of the power supply is on the back of it lol : http://i54.tinypic.com/24edx74.jpg also i got two red displays in for on my controller. To swat the green light lcd out for a red symbol / black background display : http://i55.tinypic.com/jtw040.jpg http://i45.tinypic.com/27y5ugj.jpg take a HB624 controller with ALMEGA88V chip : http://i51.tinypic.com/5wyo38.jpg put some cables and a pot meter on it : http://i53.tinypic.com/ebehad.jpg with the pot meter 10K i can adkust the screen light : To see real time the 12v rail of the SR-2 powersupply, and monitore the power drawn of the three coolit coolers : http://i54.tinypic.com/24vk7so.jpg http://i56.tinypic.com/r91zy9.jpg cpu disable jumpers soldered for make the connector for it in front of the case : http://i55.tinypic.com/2ytwqo8.jpg need to cut new Socket isolation because SR-2 has no big condensators next to the sockets, so i can use some more isolation : : http://i54.tinypic.com/2igiueu.jpg putted also three temp sensors under the full cover blok, to measure the CPU PWM 1 en 2 and the NB temp with a Koolanc TMS-200 controller : http://i56.tinypic.com/1znxsog.jpg http://i56.tinypic.com/r0ytcm.jpg http://i53.tinypic.com/293ex6s.jpg total overview of the mobo in current state: http://i54.tinypic.com/10pc3th.jpg today little testing en measurement, the boreas chiller and the freezone will be hanged on the power use controller. http://i52.tinypic.com/2eoihi0.jpg but a lot of cables here that needs to be in the case fitted. http://i51.tinypic.com/2898nkm.jpg Alu plate of 1.5mm is in, tomorrow making the adjustment of the mobo cover : http://i51.tinypic.com/m4qxj.jpg Link to comment Share on other sites More sharing options...
justinrmitchell Posted October 17, 2010 Share Posted October 17, 2010 pleased to see something different for once. well done so far. patiently waiting for more. Link to comment Share on other sites More sharing options...
Chiller Posted October 17, 2010 Author Share Posted October 17, 2010 thanks, updates will follow, i'm now working on making the motherboard cover bigger for the bigger mobo lol Link to comment Share on other sites More sharing options...
justinrmitchell Posted October 17, 2010 Share Posted October 17, 2010 hope you dont mind, posted a link on evga.com under mod rigs forum for others to see your work. i do alot of work with evga and members there. they love stuff like this. Link to comment Share on other sites More sharing options...
Chiller Posted October 17, 2010 Author Share Posted October 17, 2010 i don't mind lol. Link to comment Share on other sites More sharing options...
Chiller Posted October 18, 2010 Author Share Posted October 18, 2010 http://i45.tinypic.com/27y5ugj.jpg Today being busy with making place for all the usb cables, power led, hdd led etc to go away from mobo as fast as possible, not to show to much cables in case. Also adjusting some things to get the mobo cover enlargement fitted on case, used a lot of dremel cutting disks : http://i51.tinypic.com/34qpv2h.jpg And because the Evga SR-2 mobo doesn't have condensators like a normal LGA1366 mobo around the socket, i needed to make some new socket isolation kits for around cpu with more amramflex, pictures will say enough : http://i54.tinypic.com/2igiueu.jpg And here you see the normal cut-out of a lga1366 socket kit and that for a Evga SR-2 mobo : http://i54.tinypic.com/20p5v08.jpg Link to comment Share on other sites More sharing options...
Chiller Posted October 21, 2010 Author Share Posted October 21, 2010 just bended the alu plate in the same curve as the standard mobo cover also have : http://i53.tinypic.com/qx2xxz.jpg The curve in the red circle, the green lines is untill where the mobo cover needs to get bigger for the bigger mobo : http://i54.tinypic.com/fxxjxi.jpg Link to comment Share on other sites More sharing options...
FlawlessSoul Posted October 21, 2010 Share Posted October 21, 2010 So far, a beautiful build. Interesting choice of case for a custom build, really looking forward to seeing it come together. I'm curious as to why you're going with GTX285s though. Link to comment Share on other sites More sharing options...
Chiller Posted October 22, 2010 Author Share Posted October 22, 2010 GTX480's you mean ? Link to comment Share on other sites More sharing options...
FlawlessSoul Posted October 22, 2010 Share Posted October 22, 2010 Was going by the OC tool you've got plugged into the 285s: http://i36.tinypic.com/2i29avo.jpg Link to comment Share on other sites More sharing options...
Chiller Posted October 22, 2010 Author Share Posted October 22, 2010 it was just a pic for showing the EVbot. I only use the EVbot for motherboard, GPU's i clock them with Afterburner Link to comment Share on other sites More sharing options...
Chiller Posted October 25, 2010 Author Share Posted October 25, 2010 http://i45.tinypic.com/27y5ugj.jpg The original mobo cover has a serious cut-out for the adjustment, and you see the four square holes for mounting the new alu plate : http://i56.tinypic.com/wc0far.jpg This is the bottom of the original mobo cover, is a serious cut-out on, so Quad sli GTX480 still fitts : http://i56.tinypic.com/2m5xdmv.jpg The new alu plate working on : http://i53.tinypic.com/28tuxl5.jpg And here it's fitted on the case base plate : http://i55.tinypic.com/wqzjag.jpg Nice fit : http://i52.tinypic.com/wbt9nm.jpg And with the base plate of the big Boreas Chiller, you see that the ATX 24pin needs a cut-out, and two tubing with a BP fitting, also the Coolit Freezone V1 needs his place in this plate : http://i51.tinypic.com/2e0mget.jpg http://i51.tinypic.com/2j47uia.jpg And here you see what also needs to be cutt-out in alu plate : http://i54.tinypic.com/29m8xhz.jpg Link to comment Share on other sites More sharing options...
Chiller Posted October 25, 2010 Author Share Posted October 25, 2010 also with very small iron files i have to make the honey roster on another place : http://i56.tinypic.com/15d8f94.jpg Link to comment Share on other sites More sharing options...
Chiller Posted October 26, 2010 Author Share Posted October 26, 2010 Update after some hours work : the BP fittings are in place also the cutt-out for the ATX 24pin : http://i54.tinypic.com/15i3oyv.jpg BP fittings close-up : http://i56.tinypic.com/ilkk69.jpg The outcome of the atx24pin : http://i53.tinypic.com/2mwaxs4.jpg Inside of the ATX24pin : http://i52.tinypic.com/11hsby9.jpg http://i55.tinypic.com/2hncmbo.jpg A Total overview with the motherboard and his power connectors installed for viewing cable routing : http://i52.tinypic.com/2055rwj.jpg CPU1 Close-up : http://i55.tinypic.com/21l4zlx.jpg CPU0 Close-up : http://i51.tinypic.com/27zx8br.jpg ATX 24pin close-up : http://i55.tinypic.com/wkljdk.jpg ATX 24pin Close-up while motherboard is plugged in : http://i53.tinypic.com/23j4klx.jpg Total View ATX24 pin : http://i55.tinypic.com/24w7x5d.jpg TOTAL overview mobo + atx connectors , alu plate : http://i51.tinypic.com/m9sr5f.jpg Link to comment Share on other sites More sharing options...
Sullen Posted October 28, 2010 Share Posted October 28, 2010 Now I don't want to finish building my Classified 3X SLI setup and sell all the parts and go with an SR-2 and go crazy spending money I don't have :D but jokes aside this is just gorgeous!! Beautiful indeed... Link to comment Share on other sites More sharing options...
Chiller Posted October 30, 2010 Author Share Posted October 30, 2010 busy on fitting the Coolit Freezone V1 under the mobo cover : http://i54.tinypic.com/izrczk.jpg And making by hand the honey roster like the original was a never ending thing, and was not nice, so i will make another solution as roster to protect the fan : http://i56.tinypic.com/34pj9ya.jpg Link to comment Share on other sites More sharing options...
Chiller Posted November 4, 2010 Author Share Posted November 4, 2010 Working on the case again al day, bend the alu plate, making some acryl ready, the extra piece of hight is for the cpu power cables of the left cpu : http://i53.tinypic.com/crbzn.jpg With the cooler on his place : http://i55.tinypic.com/zvx8n7.jpg With the red acryl on his place also for the enlargement of the mobo cover : http://i51.tinypic.com/2qtfg4x.jpg And then as last also grey smoke like on the cpu cooler left en on the vga's, is for breading room : http://i55.tinypic.com/4rxnyt.jpg Link to comment Share on other sites More sharing options...
Chiller Posted November 4, 2010 Author Share Posted November 4, 2010 for today i quit, tomorrow is another day for fooling around with this case : http://i54.tinypic.com/20gdz0o.jpg Link to comment Share on other sites More sharing options...
Chiller Posted November 5, 2010 Author Share Posted November 5, 2010 here are some new pics, with a little modification on case, and did some fine work : http://i51.tinypic.com/f3uias.jpg http://i53.tinypic.com/344trbs.jpg http://i55.tinypic.com/10rlqfa.jpg http://i55.tinypic.com/ifdicz.jpg http://i51.tinypic.com/vsm444.jpg http://i54.tinypic.com/2uhbus4.jpg Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.