Stoo Posted December 25, 2003 Share Posted December 25, 2003 Hi I have recently purchased a 512 stick of the XMS PC4000 Pro and I have noticed that in CPU-Z 1.20a that the RAM only shows as PC3700 . My system consists of an ASUS P4C800e-Deluxe, P4 3.2 Proc FSB@ 230, WD 37 gig Raptors in RAID0 on Intel ICH5R, and an ATI AIW 9800 Pro. This is really making me think that I have only gotten PC3700 but have paid for PC4000 Pro.Help Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted December 25, 2003 Corsair Employee Share Posted December 25, 2003 There is not an official spec for anything faster then DDR466. And the SPD we use is based on DDR466 JEDEC Values. But the correct part# should be shown as the module you have! Link to comment Share on other sites More sharing options...
Stoo Posted December 25, 2003 Author Share Posted December 25, 2003 Thanks for the reply I have it set at 400mhz now and Cpuz shows frequency at 225 which would be 450? voltage is at 2.75 timing are 2.5,3,3,6 1 to 1 ratio ... Merry Christmas Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted December 25, 2003 Corsair Employee Share Posted December 25, 2003 You too and I would suggest that you set the Rass to Cass to "4" with these modules. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.