The Corsair User Forums  

Go Back   The Corsair User Forums > Customer Service > Warranty and RMA Questions

Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
  #1  
Old 01-29-2005, 08:06 PM
Lestat Lestat is offline
Registered User
 
Join Date: Apr 2004
Posts: 3
POST ID # = 171016
Lestat Reputation: 10
Default CM512-3200C2 module bad

The ram will prevent the computer from booting in any slot, once it's taken out the computer boots again.
Seems it shortcircuited, as it happened overnight. In the morning, no post. Until the module was removed.

Can i have a ticket please.

Regards,
Kristian
Reply With Quote
  #2  
Old 01-31-2005, 02:50 PM
RAM GUY's Avatar
RAM GUY RAM GUY is offline
Corsair Product Guru
 
Join Date: Apr 2001
Location: Fremont, CA
Posts: 118,269
POST ID # = 171239
RAM GUY Reputation: 10
Default

Can you tell me the exact model# of your memory module and please tell me if you purchased that module as a pair or set; also what is the make and model of MB you have along with the CPU speed and its FSB as well? In addition, please tell me if you have the latest BIOS installed on your system and what BIOS settings you have set for both CPU and memory and any performance settings that you may have set?
__________________
Support accounts and tickets can be created at https://support.corsair.com.
Reply With Quote
  #3  
Old 02-01-2005, 09:52 AM
Lestat Lestat is offline
Registered User
 
Join Date: Apr 2004
Posts: 3
POST ID # = 171370
Lestat Reputation: 10
Default

Quote:
Originally Posted by RAM GUY
Can you tell me the exact model# of your memory module and please tell me if you purchased that module as a pair or set; also what is the make and model of MB you have along with the CPU speed and its FSB as well? In addition, please tell me if you have the latest BIOS installed on your system and what BIOS settings you have set for both CPU and memory and any performance settings that you may have set?
The model number is CMX512-3200C2, it's purchased individually.

The make and model of the motherboard is Asus NCCH-DL, the CPU is a Xeon running stock 3.2GHz at 200MHz FSB, at the standard CAS of the module. The BIOS is the latest one of the board and settings are standard. (SPD for memory).

The module didn't work when the computer was booted in the morning, seems like something snapped overnight. Previous to this there were no problems with the setup.

L.
Reply With Quote
  #4  
Old 02-01-2005, 02:06 PM
RAM GUY's Avatar
RAM GUY RAM GUY is offline
Corsair Product Guru
 
Join Date: Apr 2001
Location: Fremont, CA
Posts: 118,269
POST ID # = 171400
RAM GUY Reputation: 10
Default

Please check all of the modules and make sure the part# and revision is matched. Should be like:
Corsair
CMX512-3200C2
XMS3202 Rev 4.1
__________________
Support accounts and tickets can be created at https://support.corsair.com.

Last edited by RAM GUY; 02-01-2005 at 06:15 PM.
Reply With Quote
  #5  
Old 02-01-2005, 02:33 PM
Lestat Lestat is offline
Registered User
 
Join Date: Apr 2004
Posts: 3
POST ID # = 171413
Lestat Reputation: 10
Default

Quote:
Originally Posted by RAM GUY
Please check all of the modules and make sure the [art# and revision is matched. Should be like:
Corsair
CMX512-3200C2
XMS3202 Rev 4.1
It says:
CMX512-3200C2
XMS3202v1.1

L.
Reply With Quote
  #6  
Old 02-01-2005, 06:16 PM
RAM GUY's Avatar
RAM GUY RAM GUY is offline
Corsair Product Guru
 
Join Date: Apr 2001
Location: Fremont, CA
Posts: 118,269
POST ID # = 171473
RAM GUY Reputation: 10
Default

Lets try replacing your modules! Please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it!
__________________
Support accounts and tickets can be created at https://support.corsair.com.
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:58 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.