michellelane71 Posted May 11, 2010 Share Posted May 11, 2010 Whats the best way to go from my HD install of windows 7 to the SSD. I have Arconis but If I image it over I read my part will be out of align. so whats the best way to handle this. I dont want to start over . I need to clone my HD to the P128 Raid setup.. Thanks Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted May 11, 2010 Corsair Employee Share Posted May 11, 2010 Booting from the current HDD with the SSD Raid Array as a second HDD go to Computer management and then format the drive array with the Quick option and set the allocation to 4K then test the array with ATTO to be sure it running properly and if so just delete the array and run Accronis then image the drive is all you have to do and just use the defaults in Accronis. Link to comment Share on other sites More sharing options...
michellelane71 Posted May 11, 2010 Author Share Posted May 11, 2010 The problem I have is tat Arconis wants to recreat the partition.. when u say all default I am using trueimage 2010 and the only option I see it to Clone a partition from one to another. and when I did that last time.. my partition was out of alignment Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted May 11, 2010 Corsair Employee Share Posted May 11, 2010 Just use the defaults and let it automatically proportion the drive it works fine when ever I have used it and it has to be the latest version 2010. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.