westsider Posted February 9, 2013 Share Posted February 9, 2013 Hi I have bought used Corsair Force GT 120GB and wanted you to check if this Result is Ok :) http://i052.radikal.ru/1302/e4/83adbf3e11d8.jpg It has Host read 1.5TB and Host write 755GB 14 Months old IMO Read is OK but write speed seems a little Low now about config: Asus X79 Pro 3930K@4.5Ghz 32GB DDR3 1866 SSD is connected on Intel SATA 6GB Slot 1 with Asus "Sata3" Kabel SSD is used as OS Drive and has now 60Gb Free Space from 111GB OS: Windows 7 64 Ultimate SP1 SSD Optimisation: Done Link to comment Share on other sites More sharing options...
Administrators Technobeard Posted February 9, 2013 Administrators Share Posted February 9, 2013 Are you sure it's on one of the white INTEL SATA connections? The ATTO scores look more like a result from a MARVELL white SATA connection. Link to comment Share on other sites More sharing options...
Toasted Posted February 10, 2013 Share Posted February 10, 2013 From the ASUS website Intel® X79 chipset : 2 x SATA 6Gb/s port(s), white 4 x SATA 3Gb/s port(s), blue Support Raid 0, 1, 5, 10 Marvell® PCIe 9128 controller : 2 x SATA 6Gb/s port(s), white ASMedia® ASM1061 controller : 2 x Power eSATA 6Gb/s port(s), green Link to comment Share on other sites More sharing options...
westsider Posted February 14, 2013 Author Share Posted February 14, 2013 yes i am pretty sure beacuse marvel controller is off http://s017.radikal.ru/i435/1302/20/fc8c8c20561d.jpg Link to comment Share on other sites More sharing options...
westsider Posted February 14, 2013 Author Share Posted February 14, 2013 and how about now? http://s018.radikal.ru/i526/1302/d6/d5af89bd0e00.jpg Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted February 14, 2013 Corsair Employee Share Posted February 14, 2013 It looks like you may have a spinning HDD in the S-ATA Port next to the port where you have the SSD and if you do I would move the Spinning HDD to another port and retest. Link to comment Share on other sites More sharing options...
westsider Posted February 15, 2013 Author Share Posted February 15, 2013 there are 3 HDD-s and 1 SSD SSD at SATA3 all 3 HDDs at Sata2 Ports from Intel so there is only one free SATA3 port and one free SATA2 port Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted February 15, 2013 Corsair Employee Share Posted February 15, 2013 The S-ATA Ports are on the MB in Pairs and if you connect an SSD next to drive that does not support AHCI it will force both drives to run in IDE mode is my point, so to test try disconnecting the spinning HDD that is next to the SSD and retest the drive. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.