The Corsair User Forums  

Go Back   The Corsair User Forums > Corsair Product Discussion > Cases

Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
  #1  
Old 02-19-2019, 03:56 PM
Blayn0707 Blayn0707 is offline
Registered User
 
Join Date: Feb 2019
Posts: 1
POST ID # = 994902
Blayn0707 Reputation: 10
Default Crytal 570x Mirror - verical GPU mount temp. issue

Hello everyone.

I have built my first gaming computer, and among other things, have mounted vertically Gigabyte Aorus RTX 2080ti Extreme to the case vertical mount.

The issue i have is that with the side panel installed my GPU gets to 87C, throttles (3DMark stress test puts me at around 82% stability).

Removing the side panel, same stress test, 74-76C max, 3DMark stress test goes to 98% with 0 throttle.

The cards is only a few mm from the glass, so obviously the temperature issue is coming from the glass being too close.

I already have 7 fans in the case, so rly no point in putting anymore in.

Are there any solutions to my problem?
Maybe some distancers to push the side panel further out? Suggestions?
Or maybe get a custom pci slot vertical mount and try to position the card further "inside" the case so it can breathe better?

I would rly like to keep my card vertically mounted b/c it looks great so i hope there is a solution.

Thank you for your time.

Cheers.
Reply With Quote


  #2  
Old 02-20-2019, 07:07 PM
simplyshredded simplyshredded is offline
Registered User
simplyshredded's PC Specs
 
Join Date: Aug 2017
Location: Melbourne, Australia GMT+11.
Posts: 57
POST ID # = 995036
simplyshredded Reputation: 20
Default

I’m also facing the same issue.

I decided I would watercool my gpu to solve this issue (if my logic is correct) but the gpu is so close to the panel there isn’t enough room to fit a tube between the glass and gpu. So I’ll have to run it behind which doesn’t look as good

Quote:
Originally Posted by Blayn0707 View Post
Hello everyone.

I have built my first gaming computer, and among other things, have mounted vertically Gigabyte Aorus RTX 2080ti Extreme to the case vertical mount.

The issue i have is that with the side panel installed my GPU gets to 87C, throttles (3DMark stress test puts me at around 82% stability).

Removing the side panel, same stress test, 74-76C max, 3DMark stress test goes to 98% with 0 throttle.

The cards is only a few mm from the glass, so obviously the temperature issue is coming from the glass being too close.

I already have 7 fans in the case, so rly no point in putting anymore in.

Are there any solutions to my problem?
Maybe some distancers to push the side panel further out? Suggestions?
Or maybe get a custom pci slot vertical mount and try to position the card further "inside" the case so it can breathe better?

I would rly like to keep my card vertically mounted b/c it looks great so i hope there is a solution.

Thank you for your time.

Cheers.
Reply With Quote


Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:21 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.