Templar Posted June 18, 2019 Share Posted June 18, 2019 Hello all Got the H100i V2 - In the LINK soft. I get the correct RPM and I can set the curve to increase the speeds with increased CPU heat, very cool. However the BIOS header always shows 1500RPM no matter what speeds the LINK operates the fans at. Any way of getting the right number in the motherboard too by for example changing the CPU FAN head settings in the BIOS to "FULL SPEED" etc. but the fan header can be customized to throttle the fans in heatsteps just like the LINK software offers. Thank you. Link to comment Share on other sites More sharing options...
c-attack Posted June 18, 2019 Share Posted June 18, 2019 No. The GT/GTX/v2 version coolers will all report exactly 1/2 of the actual speed. A “revolution” on a pump is not the same as a fan. Some use a modifier to turn it into the expected number. Others do not. In this case it is as simple as multiplying by 2. You should keep your Asus fan control on Full Speed at all times. This is the same as disabled in the advanced BIOS. If you don’t, you are cutting voltage to the pump. Make all speed adjustments in Link/iCUE. Link to comment Share on other sites More sharing options...
Templar Posted June 18, 2019 Author Share Posted June 18, 2019 Thank you very much c-attack. Link to comment Share on other sites More sharing options...
Recommended Posts