Blindsay04 Posted November 12, 2018 Share Posted November 12, 2018 Hey all, Got the following corsair gear, corsair crystal 280x rgb HX750i H115i RGB PLATINUM CORSAIR Vengeance RGB Pro I would also like to buy some of their light strips but im not sure which to get/how they would integrate and be controlled What exactly do i need to control it all? my motherboard only has 1.5 (ASRock Z390M Pro4) usb 2.0 headers which is not enough because the PSU, AIO & Node Pro in the case each require one (without even adding the led strips). I am trying to keep the install as clean as possible (Ie as much behind the motherboard as possible). Is something like ditch the node pro and get a commander pro the answer? Any help would be appreciated. Thanks! Link to comment Share on other sites More sharing options...
DevBiker Posted November 12, 2018 Share Posted November 12, 2018 Hey ... take a look at the RGB FAQ linked in my signature. And that 280X, by the way, will come with a Lighting Node Pro and RGB Fan Hub. You'll have a free channel on the LNP too. Link to comment Share on other sites More sharing options...
Blindsay04 Posted November 13, 2018 Author Share Posted November 13, 2018 Hey ... take a look at the RGB FAQ linked in my signature. And that 280X, by the way, will come with a Lighting Node Pro and RGB Fan Hub. You'll have a free channel on the LNP too. Thanks, if I got a commander pro, would I even need the LNP? Connect my LL fans to the hub and the hub to 1 channel of the commander pro, use the other channel for lightstrips Connect the PSU and aio usb connectors to the commander pro and then finally the command pro to one of my USB headers? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.