Ghostyy Posted January 16, 2015 Share Posted January 16, 2015 Hey, I have been looking at this for a few days now, my M65 has been having issues drawing horizontal lines and circles.. I can't play games like CS:GO properly as my mouse will jitter or stutter downwards or upwards whilst trying to aim. I have... 1) Updated Drivers and Firmware 2) Cleaned the bottom of my mouse completely 3) Tried with and without a mousepad 4) Rebooted several times 5) Unplugged and plugged mouse back in several times (left it out for different times.. 5 mins - 30mins) If anyone else has this sort of issue or knows what I am describing please give me some suggestions or a possible fix. Thanks in advanced, Regards, Link to comment Share on other sites More sharing options...
Toasted Posted January 17, 2015 Share Posted January 17, 2015 Have you tried disabling angle snapping? Does it help? Seems it could possibly be a sensor issue. Try the mouse on another computer and see if that helps. Also try a piece of paper as the tracking surface. Does anything change? Link to comment Share on other sites More sharing options...
Ghostyy Posted January 17, 2015 Author Share Posted January 17, 2015 Have you tried disabling angle snapping? Does it help? Seems it could possibly be a sensor issue. Try the mouse on another computer and see if that helps. Also try a piece of paper as the tracking surface. Does anything change? Funnily enough last night I found a glossy piece of paper and put that under my mouse and that seems to have done the trick I tried a cloth mousepad also but didn't seem to perform aswell. Thanks for the suggestion :) Link to comment Share on other sites More sharing options...
Toasted Posted January 19, 2015 Share Posted January 19, 2015 Seems the sensor may not "like" the cloth mousepad. Did it start when you first plugged the M65 in to the computer and used the mouse normally? or did it happen a few days later? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.