Chacal Posted June 20, 2012 Share Posted June 20, 2012 Hi, When I´m playing or seeing the internet some times my computer stop doing all. After 2 minutes I can see a blue screen: "collecting data for crash dump... Initializing disk for crash dump..." This problem starts when I get "Corsair Force 3 SSD". I search on Internet for a sollution and I find to upgrade Firmware. My firmware is 1.2 and Signature 142-142-22788 but when I follow instructions for upgrade it, I get the check OK on the disk and FW Rev didn´t change. I reset computer, Rescan Drives and nothing change. I try again with same result. I was playing 30min ago and I blue screen falls my computer again. Can you help me? O.S. Windows 7 Thx Link to comment Share on other sites More sharing options...
Wired Posted June 20, 2012 Share Posted June 20, 2012 Please post your specs in your profile here: http://forum.corsair.com/forums/profile.php?do=extra Did you follow the instructions in the update instructions, e.g. put the SSD on an Intel or AMD port, right click and run as admin, etc? Link to comment Share on other sites More sharing options...
Chacal Posted June 20, 2012 Author Share Posted June 20, 2012 Please post your specs in your profile here: http://forum.corsair.com/forums/profile.php?do=extra Did you follow the instructions in the update instructions, e.g. put the SSD on an Intel or AMD port, right click and run as admin, etc? How I can do this? "put the SSD on an Intel or AMD port" My disc is in AHCI and I run as administrator. I put all specs in my profile. Link to comment Share on other sites More sharing options...
Wired Posted June 20, 2012 Share Posted June 20, 2012 Plug it into an Intel SATA port on the motherboard. Link to comment Share on other sites More sharing options...
Chacal Posted June 20, 2012 Author Share Posted June 20, 2012 It is in the Sata3 port. i have to put it in sata 2? that mean?¿ Link to comment Share on other sites More sharing options...
Yellowbeard Posted June 20, 2012 Share Posted June 20, 2012 It is in the Sata3 port. i have to put it in sata 2? that mean?¿ Yes, connect it to the SATA2 port. Your SATA3 ports are connected to a Marvell controller. As noted in the instructions, you cannot run the update connected to a Marvell controller. Link to comment Share on other sites More sharing options...
Chacal Posted June 20, 2012 Author Share Posted June 20, 2012 Thanks. I didn´t know that Sata2 port is called "Intel SATA port", sorry. I will do it.. Link to comment Share on other sites More sharing options...
Yellowbeard Posted June 20, 2012 Share Posted June 20, 2012 Thanks. I didn´t know that Sata2 port is called "Intel SATA port", sorry. I will do it.. Just FYI, this information is in your manual. Your motherboard has 2 SATA controllers. One is the Intel ICH10-R and the other is the Marvell controller. Link to comment Share on other sites More sharing options...
Chacal Posted June 22, 2012 Author Share Posted June 22, 2012 Updated 5.02, thanks a lot. I will test with games and internet. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.