Jump to content
Corsair Community

problem with kits


fadbamsendk

Recommended Posts

hi there

i have this motherboard asus p8p67

there is some errors i would like help to

 

1 in bios my cpu show 88 degrees i know its wrong becouse i have installed a

real temp program and that shows 24 degrees and my systems runs fine

cpu is not hot at all :-)

so what can i do to solve this problem ???

 

2 i have 8 gb of ram a kit of 2x4 gb corsair

now i have brougt a kit of 16 gb corsair ram cml 16gx3m4a1600c9

i have plugged them in at starts up

i never mede it to windows the system freezes all the time

what could be wrong and must i do something in bios

Link to comment
Share on other sites

1 in bios my cpu show 88 degrees i know its wrong becouse i have installed a

real temp program and that shows 24 degrees and my systems runs fine

cpu is not hot at all :-)

so what can i do to solve this problem ???

Check for a newer BIOS and see if that helps. If nit is not available i would contact ASUS.

 

2 i have 8 gb of ram a kit of 2x4 gb corsair

now i have brougt a kit of 16 gb corsair ram cml 16gx3m4a1600c9

i have plugged them in at starts up

i never mede it to windows the system freezes all the time

what could be wrong and must i do something in bios

Rest your CMOS, then install just one stick and see if it will post. If it will let you into the BIOS load set-up defaults and then enable XMP. See if it will boot to windows normally. If so shut down and add the other stick. Restart the machine.

Link to comment
Share on other sites

i forgot to tell that the new kit i brought is 4x4 gb ram 1 kit

so schould i stille do the same as above ??

Yuppers! And it may be best to run through memtest one stick at a time if you can get it to post with one stick installed. If you need memtest, there is a link on the left side of the forums to grab it.

 

Happy Holidays!

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...