ImtheBest Posted January 26, 2015 Share Posted January 26, 2015 Hi i have having some problem with the Corsair Link and H100i with the Commander mini and Airflow Led Fan. I plugged everything in the right way. http://i.imgur.com/Hksk0KR.png I have plugged the small connactor in to the H100i like the Tech guy said from COrsair but for some reason it does not detect my H100i now and fans at the Top. So i unplugged the splitter on that came with the H100i and used the connectors from the commander mini two hook up to the fans up top on the radiator of the H100i. So i unplugged the small connector and likly i had another USB 2.0 on my mother broad and plugged back in the one connator on the side of the H100i. Then the Airflow Led Fan I reconnected the 4pin from the CPU fan to the commander mini now all connators from the Commander mini are all used up. But i really wish i knew why the small connector did not work shown in the screen shot above. Also i I'm having issues with the H100i now with the Led color now when i shuttdown my PC and then start it up again it does not go to red like i have it set to in the Corsair software. I I'm currently using Windows 8.1 x64 I have tried the regedit stuff and that does not help Also i have the latest Corsair Link Software installed, And i have tried multiple times reinstalling it that didn't help either 9/30/2014 - Corsair Link Software Update Release Candidate Version 2.7.5361 Somebody here on this forum help me or Corsair tech please need to fix this or help me Please Thank U Link to comment Share on other sites More sharing options...
red-ray Posted January 26, 2015 Share Posted January 26, 2015 I'm having issues with the H100i now with the Led color now when i shuttdown my PC and then start it up again it does not go to red like i have it set to in the Corsair software. Set Red 255, Green 1 and Blue 1 then it will stay red! It's a firmware bug in the H100i. Is the issue the CL Hardware or CL Software? Post screen shots as per http://forum.corsair.com/forums/showthread.php?t=137060 so it's possible to tell. Link to comment Share on other sites More sharing options...
ImtheBest Posted January 26, 2015 Author Share Posted January 26, 2015 Set Red 255, Green 1 and Blue 1 then it will stay red! It's a firmware bug in the H100i. Is the issue the CL Hardware or CL Software? Post screen shots as per http://forum.corsair.com/forums/showthread.php?t=137060 so it's possible to tell. Thank u very much for helping me red-ray Set Red 255, Green 1 and Blue 1 then it will stay red! It's a firmware bug in the H100i. OK i understand this part for the Led stuff I need i little bit more help with this i'm not following u on what u want to know. Is the issue the CL Hardware or CL Software? Post screen shots as per http://forum.corsair.com/forums/showthread.php?t=137060 so it's possible to tell. Also like i said the connector to the commander mini in the picture that u just pugg in like the Corsair tech guy said does not show my H100i. Can u show me a screen shot of how yours looks so i know if mine is right could help me some Thank u Link to comment Share on other sites More sharing options...
ImtheBest Posted January 26, 2015 Author Share Posted January 26, 2015 Also sorry right now i have the USB 2.0 plugged in the cable that came with the H100i right now not the small connector to the commander mini. as it was not showing up my H100i on the Corsair software Link to comment Share on other sites More sharing options...
ImtheBest Posted January 26, 2015 Author Share Posted January 26, 2015 http://i.imgur.com/5znYWSP.png http://i.imgur.com/BO7FMZD.png Also like i said before I'm using the USB 2.0 and not the small connector as that didn't detect my h100i for some reason Hope this helps a bit more. Also how did u get this box es Link to comment Share on other sites More sharing options...
Specter Posted January 26, 2015 Share Posted January 26, 2015 The Commander Mini should be connected to the USB internal header then the CL cable should connect the Commander mini and the H100i together. Then you should completely uninstall the CL software and delete the profile folders. Reboot then do a clean install. Link to comment Share on other sites More sharing options...
red-ray Posted January 26, 2015 Share Posted January 26, 2015 To get the panels do Menu->File->Link Devices. Exit CL and the start SIV to get Menu->Tools->Link Status. I find if SIV reports all the CL hardware then all I need to do to get CL working is exit both SIV and CL, delete the CL profile file, start CL and finally create a new profile. Link to comment Share on other sites More sharing options...
ImtheBest Posted January 27, 2015 Author Share Posted January 27, 2015 The Commander Mini should be connected to the USB internal header then the CL cable should connect the Commander mini and the H100i together. Then you should completely uninstall the CL software and delete the profile folders. Reboot then do a clean install. I did do this but it was not detecting my H100i - i will try again tho and see what happens Link to comment Share on other sites More sharing options...
ImtheBest Posted January 27, 2015 Author Share Posted January 27, 2015 To get the panels do Menu->File->Link Devices. Exit CL and the start SIV to get Menu->Tools->Link Status. I find if SIV reports all the CL hardware then all I need to do to get CL working is exit both SIV and CL, delete the CL profile file, start CL and finally create a new profile. What do u mean by this To get the panels do Menu->File->Link Devices where is that located. and how do i get this Link to comment Share on other sites More sharing options...
ImtheBest Posted January 27, 2015 Author Share Posted January 27, 2015 i dont even have that program where do i get this from Link to comment Share on other sites More sharing options...
ImtheBest Posted January 27, 2015 Author Share Posted January 27, 2015 Mine looks like this how come mine doesen't have the Corsair logos and everything http://i.imgur.com/380jC1p.png Link to comment Share on other sites More sharing options...
ImtheBest Posted January 27, 2015 Author Share Posted January 27, 2015 I found out how to get it now thanks guys http://i.imgur.com/z0FSjLT.png Link to comment Share on other sites More sharing options...
ImtheBest Posted January 27, 2015 Author Share Posted January 27, 2015 I will connect the small connector again and see what happens and let u guys know what the status is Link to comment Share on other sites More sharing options...
red-ray Posted January 27, 2015 Share Posted January 27, 2015 You need to exit CL, run SIV and then post [Link Status]. As CL fails to use a mutex other programs cannot report CL hardware while CL is active. Link to comment Share on other sites More sharing options...
ImtheBest Posted January 27, 2015 Author Share Posted January 27, 2015 You need to exit CL, run SIV and then post [Link Status]. As CL fails to use a mutex other programs cannot report CL hardware while CL is active. Did i do it right up top??? Link to comment Share on other sites More sharing options...
ImtheBest Posted January 27, 2015 Author Share Posted January 27, 2015 http://i.imgur.com/dLDcbzn.png I got it now thanks red-ray Link to comment Share on other sites More sharing options...
ImtheBest Posted January 27, 2015 Author Share Posted January 27, 2015 I just need to connect the small connector again and see if i can get it to work now without using the USB. through the commander mini Link to comment Share on other sites More sharing options...
red-ray Posted January 27, 2015 Share Posted January 27, 2015 Yes, but when you use the C-Link cable you MUST unplug the H100i USB cable otherwise strange things will happen. Please press the [Link Status] button and post the resultant screen shot. The [uSB Bus] panel is also helpful in figuring out some issues. I see there is a ghost Corsair Integrated USB Bridge device. If you wish to delete it do what https://support.microsoft.com/kb/315539?wa=wsignin1.0 says. Link to comment Share on other sites More sharing options...
ImtheBest Posted January 27, 2015 Author Share Posted January 27, 2015 Yes, but when you use the C-Link cable you MUST unplug the H100i USB cable otherwise strange things will happen. yes i know that :D Please press the [Link Status] button and post the resultant screen shot. The [uSB Bus] panel is also helpful in figuring out some issues. Did u want me to do that know with the USB 2.0 plugged in to the H100i or did u want me to unpugg it and pugg the small conntor in to the commander and do it everything at once I see there is a ghost Corsair Integrated USB Bridge device. If you wish to delete it do what https://support.microsoft.com/kb/315539?wa=wsignin1.0 says What do u mean by this i don't understand what this is please show more about what this mean i'm new to this stuff please give me more on that i'm not sure what this is about Thanks for helping me red-ray u Rock :D Link to comment Share on other sites More sharing options...
ImtheBest Posted January 27, 2015 Author Share Posted January 27, 2015 I'm not sure what u mean about this I see there is a ghost Corsair Integrated USB Bridge device. If you wish to delete it do what https://support.microsoft.com/kb/315539?wa=wsignin1.0 says Also I'm on Windows 8.1 64bit and it took me to Microsoft site I'm still a little confused about this not sure what u referring to this for whats this do Link to comment Share on other sites More sharing options...
ImtheBest Posted January 27, 2015 Author Share Posted January 27, 2015 http://i.imgur.com/QZm0JsE.png http://i.imgur.com/fZSTHsV.png Here's the stuff u wanted :) Also like i said before its using the USB 2.0 On my H100i still. I haven't removed it and connected the small cable yet to the commander and H100i. I will do that next and bring up the SIv again to show u and maybe u can help to see whats wrong Thank u red-ray Link to comment Share on other sites More sharing options...
ImtheBest Posted January 27, 2015 Author Share Posted January 27, 2015 right now how i have it seems to be working fine with the USB from the H100i pugged in to the 2.0 on my motherboard. And the commander mini also connected to a USB 2.0 on my motherhood. seems to be fine like this way. Now to try the small cable The Led worked great now when i shuttdown and turn back on red-ray thanks for that info Link to comment Share on other sites More sharing options...
wytnyt Posted January 27, 2015 Share Posted January 27, 2015 right now how i have it seems to be working fine with the USB from the H100i pugged in to the 2.0 on my motherboard. And the commander mini also connected to a USB 2.0 on my motherhood. seems to be fine like this way. Now to try the small cable The Led worked great now when i shuttdown and turn back on red-ray thanks for that info You'll need to do a cold boot to see if it retains the settings... Link to comment Share on other sites More sharing options...
ImtheBest Posted January 27, 2015 Author Share Posted January 27, 2015 You'll need to do a cold boot to see if it retains the settings... Ya it does. I just need to connect the small connator now without using the USB 2.0 on the H100i. I'm also waiting for red-ray to get back to me cuase i'm not sure what he meant about this I see there is a ghost Corsair Integrated USB Bridge device. If you wish to delete it do what https://support.microsoft.com/kb/315539?wa=wsignin1.0 says Thanks guys for helping me out u really are geniuses Link to comment Share on other sites More sharing options...
red-ray Posted January 27, 2015 Share Posted January 27, 2015 Looking at [Link Status] there don't seem to be any fans connected to the H100i. Where are the H100i fans connected? If it's the CL Mini the it would be better to connect them to the H100i so you could then easily use the H100i temperature to control their speed? What fan mode are you using? [Link Fans] will report this for all the fans. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.