Gronar Posted May 24, 2019 Share Posted May 24, 2019 Should the fan speeds match on this cooler? Fan number one runs around 500RPM slower than fan two and I'm wondering if that is normal? That's running the stock "balanced" performance profile. Link to comment Share on other sites More sharing options...
c-attack Posted May 24, 2019 Share Posted May 24, 2019 (edited) That seems too large a variance for me. Can you try setting a manual fixed rpm or % in a custom curve? See if they move together. Then make it higher or lower. Does one fan routinely fail to catch up? The next step after that is to switch the fan connectors so fan 1->2 and 2->1. That may help identify if it is the fan or a software/hardware issue. Edited May 24, 2019 by c-attack Link to comment Share on other sites More sharing options...
Gronar Posted May 24, 2019 Author Share Posted May 24, 2019 That seems too large a variance for me. Can you try setting a manual fixed rpm or % in a custom curve? See if the move together. Make it higher or lower. Does one fan routinely fail to catch up? The next step after that is to switch the fan connectors so fan 1->2 and 2->1. That may help identify if it is the fan or a software/hardware issue. Manual fixed RPM of 1500 and they are within 5-10 RPM of each other running at 1495-1505. Don't have the time today to swap the connector around and try that. Link to comment Share on other sites More sharing options...
Recommended Posts