Dubz Posted March 1, 2018 Share Posted March 1, 2018 I've posted before to no answer but i'll try again. I use the voice prompt in Q to hear my headphones status. Currently the software has no idea what my battery power is, it'll say 'battery low' and report 10% battery, i plug in the cable and after 3 minutes tell me 'charge complete' and then when i unplug will straight away get 'battery critical'. Plug back in and charging again for 2 mins, unplug and it's 'battery low', now it will say 20%, rinse and repeat never giving the same amount (or close). ...i just unplugged again after it told me i was at <5%, it now says i'm over 50%. I've previously turned off the software to stop the issue as i will then find the battery will last many hours but then it disables the Dolby making it sound bad. Link to comment Share on other sites More sharing options...
Corsair Employee Corsair Nick Posted March 1, 2018 Corsair Employee Share Posted March 1, 2018 Try fully discharging the headset until it won't turn on anymore, and then fully charge it without interruption. I saw you post in the other thread already regarding the charge level being off, but this may help calibrate it to be normal. Link to comment Share on other sites More sharing options...
Dubz Posted March 1, 2018 Author Share Posted March 1, 2018 Sorry but i've been doing that for 2 months, trying a different cable right now. Current still charging. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.