janwillem117 Posted June 21, 2019 Share Posted June 21, 2019 I have 7 rgb fans and 4 rgb strips in my system. Even when I set them to white instant lighting some fans change colors, turn off leds. The main rgb strips(3 pieces in a string) barely turn on at all. Please see attached Youtube video: [ame=https://www.youtube.com/watch?v=5a0dGq31K_c]Youtube video[/ame] Can someone tell me what the issue might be? Software related or something else? Link to comment Share on other sites More sharing options...
crashniels Posted June 21, 2019 Share Posted June 21, 2019 Try and connect each strip and fan one by one. There might be a broken connection in one of the fans which does not allow the data to pass past it. Link to comment Share on other sites More sharing options...
janwillem117 Posted June 23, 2019 Author Share Posted June 23, 2019 When the fans are all on predefined rainbow mode there is no issue. When I set them to instant lighting all the lighting starts flickering and changing colors etc.. I have the most recent version of iCue. Any other suggestions? Link to comment Share on other sites More sharing options...
FoxeuH Posted June 24, 2019 Share Posted June 24, 2019 (edited) I'm having a similar issue with 2 of my 5 fans. They randomly change color. I've been observing my issue for a while now, and it seems like this is only happening to me while I'm gaming. After I stop gaming, everything comes back to normal. Is this the case for you as well ? Edited June 24, 2019 by FoxeuH Link to comment Share on other sites More sharing options...
crack_monkey Posted June 26, 2019 Share Posted June 26, 2019 Same Problem here, but the problem stays when its there. it comes without doing something after 10-30 minutes after start of the PC i have this issue a long time ago, i switched fans and so on, nothing worked. so it seem to be a software problem. Link to comment Share on other sites More sharing options...
Majarspeed Posted June 26, 2019 Share Posted June 26, 2019 I had posted about this 6 months ago. You could set the channel with fans to 6 and it would work but only with the lighting effects that were non-sequential. As of the the firmware update on 6/25/19 (0.9.16 on lighting node pro). I can now set them to the correct 4 and the sequential effects now work. They sent me hardware replacement for a few parts none fixed the issue till this. Link to comment Share on other sites More sharing options...
RGBLover Posted June 29, 2019 Share Posted June 29, 2019 I'm having a similar issue with 2 of my 5 fans. They randomly change color. I've been observing my issue for a while now, and it seems like this is only happening to me while I'm gaming. After I stop gaming, everything comes back to normal. Is this the case for you as well ? I have a similar issue as well but my issue is with the 4 rgb strips that I have connected to LED 2 channel on my commander pro. They freeze when I'm gaming and it's fine when I'm not gaming. The 6 LL120 fans connected to my LED1 channel on my commander pro work without issues. Do you have the fans connected to your LED2 channel on your commander pro? Just wondering if there is a glitch with the icue and LED 2 channel. Link to comment Share on other sites More sharing options...
Mrbenss Posted June 29, 2019 Share Posted June 29, 2019 This is a problem at Corsair since their update, the fans do not work properly, the LEDs Rainbow, have freezes ... The only way is to wait until corsair update ICUE .. I made all the connections again and nothing helps .. Link to comment Share on other sites More sharing options...
FoxeuH Posted July 1, 2019 Share Posted July 1, 2019 I have a similar issue as well but my issue is with the 4 rgb strips that I have connected to LED 2 channel on my commander pro. They freeze when I'm gaming and it's fine when I'm not gaming. The 6 LL120 fans connected to my LED1 channel on my commander pro work without issues. Do you have the fans connected to your LED2 channel on your commander pro? Just wondering if there is a glitch with the icue and LED 2 channel. No, my fans are connected to LED 1. But as Mrbenss said, their seems to be a software issue. My issue got worse since I updated to the latest version. Now, the fans are changing color even while I'm not gaming. When I installed the update, all the LEDs on my fan #4 were completely OFF as well as alsmot half of those on fan #5. After several restarts, those LEDs turned back on and had the desired blue color, but now they are stuck. If I try to change the color, they stay blue. Here's an example when I change the color to red. I would definetly say that my issue is software related. Link to comment Share on other sites More sharing options...
RGBLover Posted July 13, 2019 Share Posted July 13, 2019 I have a similar issue as well but my issue is with the 4 rgb strips that I have connected to LED 2 channel on my commander pro. They freeze when I'm gaming and it's fine when I'm not gaming. The 6 LL120 fans connected to my LED1 channel on my commander pro work without issues. Do you have the fans connected to your LED2 channel on your commander pro? Just wondering if there is a glitch with the icue and LED 2 channel. Just an update on my issue; Corsair support team was really helpful and they sent me new rgb strips and the problem is gone :laughing: . So the issue was due to faulty strips. Link to comment Share on other sites More sharing options...
Recommended Posts