fatboi Posted March 15, 2015 Share Posted March 15, 2015 Hi, Have just installed a H80i GT and having trouble with the link software. I am trying to set a custom curve for the H80 cooler fans but this doesn't seem to work, no matter what settings I use no changes are made and the fans just spin at around 750rpm. Using the latest software (3.1.5525), saved a test profile with fan settings set to 100%. Pump is connected to CPU_Fan on mobo. (as per manual) 2x Akasa Viper (PWM) fans connected to Corsair Link. thanks http://i.imgur.com/kyHmuDP.jpg Link to comment Share on other sites More sharing options...
Corsair Employee Corsair Dustin Posted March 16, 2015 Corsair Employee Share Posted March 16, 2015 Interesting. Have you tried setting them all to 90%? Or manually specifying an RPM? Have you messed with the settings at all outside of the Custom Curve? Link to comment Share on other sites More sharing options...
fatboi Posted March 16, 2015 Author Share Posted March 16, 2015 Interesting. Have you tried setting them all to 90%? Or manually specifying an RPM? Have you messed with the settings at all outside of the Custom Curve? just set all points to 90% and still no change. This is a clean install and no settings have changed, everything is default. Doesn't let me specify the RPM for each point only percent. (Only setting changed were the dark theme and changed pic of the case background) Have changed "mode" to set RPM and that works as does every other setting. thanks. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.