blade Posted November 14, 2005 Share Posted November 14, 2005 P4 3.4E 800FSB ASUS P4P800 E DELUXE (BIOS 1018) AI Over Clock Tuner: Manual CPU Freq: 200 MHz System Performance: Auto Memory Frequency: 100%/DDR400 Dim Voltage to 2.75 Volts Legacy USB: ENABLE MAM/PAM/PAT: Auto SDRAM CAS Latency: 2T SDRAM RAS to CAS Delay (tRCD): 3T SDRAM Row Precharge (tRP): 3T SDRAM Active to Precharge Delay (tRAS): 6T My computer wont boot with the system performance on TURBO but its fine if on AUTO. Can some1 help ? thanks ! btw the ram has no problems. brand new and tested. thanks again ! Link to comment Share on other sites More sharing options...
Yellowbeard Posted November 14, 2005 Share Posted November 14, 2005 Leave the turbo off. That is a performance setting and the reason your system won't boot is that those turbo type settings are often unpredictable. If you want more performance from your system, you could try OCing it manually. However, the 2,3,3,6 timings are technically OCed already as they exceed JEDEC specs. The turbo tries to OC in addition to what you already have and thus the instability. Mike. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.