jmike Posted September 10, 2017 Share Posted September 10, 2017 I can lightly grab the pump on my H100i V2, rock it back and forth and slightly lift it off the CPU. Troubleshooting let me to conclude either the stand-off screws were too long or the bracket is too long. With the pump resting on the CPU, the bracket is a few millimeters off it's pressure point on the pump itself. At first I tried some nylon and thicker rubber washers for spacers on the backside of the motherboard but once I was able to confirm the stand off screws were flush with the motherboard is when I noticed the bracket itself hitting the tops of the stand-offs well before it rests on the pump. I've tried different orientations of the pump but it didn't help. Anyone else have ideas? I've opened a ticket but not sure what the options are unless they offer shorter mounting brackets and/or stand-off screws. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.