The Corsair User Forums  

Go Back   The Corsair User Forums > Corsair Product Discussion > Cooling

Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
  #1  
Old 05-25-2018, 01:32 PM
jcmoxy jcmoxy is offline
Registered User
 
Join Date: May 2018
Posts: 1
POST ID # = 956119
jcmoxy Reputation: 10
Default Max Fan Speed for H80i v2

Hi. I recently replaced an H90 AIO with an H80i v2 AIO. The new cooler is keeping my CPU (i7-8700K) @ about 3-5 degrees C warmer (30C - 35C at idle) than my older H90 AIO (About 30C at idle). On the H80i v2 I used stock TIM, whereas on the H90 I used Grizzly Kryonaut, also the H90 pulled air into the case whereas the H80i v2 blows air out of the case. So, maybe with a few tweaks I can get the H80i v2 to where my H90 used to be ... some stress testing will eventually tell when I get the time. Any tips on improving performance is welcome.

So, my question arises from one of the H80i v2's tech specs. The box says the fans max out at about 2435 rpm. However, Corsair LINK software suggest that at 100%, the CPU fan's speed sits at just about 2000 rpm. Also, some software that came with my mobo (AORUS Gaming 7) suggests the CPU fan maxes out (and is running) at about 1442 rpm.

This told me I may need to take a look at some BIOS settings. It features the option to set the CPU_FAN header to AUTO, VOLTAGE or PWM. Which should I choose? I'm presuming the VOLTAGE setting will allow me to set a specific voltage to the CPU_FAN header; and I read in various places the H80i v2 requires a continuous 12 volts. Is that correct? At the same time, the SP120L is a PWM fan, and that makes me think I should choose PWM. (I'm guessing the correct selection here will let me reach max fan speeds as indicated on the H80i v2's fan tech specs)

At the moment I have the CPU FAN header set to auto.

Thanks for any tips and/or advice. This is a second build (an upgrade to my 1st), and I know just enough to know there's a lot I don't know about building PCs.

Last edited by jcmoxy; 05-25-2018 at 01:37 PM.
Reply With Quote


  #2  
Old 05-25-2018, 07:03 PM
DevBiker's Avatar
DevBiker DevBiker is offline
iCue βeta Team Green
DevBiker's PC Specs
 
Join Date: Feb 2017
Location: Republic of Texas
Posts: 3,338
POST ID # = 956155
DevBiker Reputation: 65
Default

The CPU Fan reading for the H80i V2 is 1/2 the pump RPM.

You can get the speed of the cooler's fans in Link. The stock fans should be around 2400 RPM, IIRC - other fans will have different speeds. The fan connector supplies power to the H80iV2 and does need the full 12V at all times. Setting it to PWM mode or setting it to 100%/Full Power/Speed Control Disabled (the terminology varies by mobo manufacturer).

Regarding the airflow ... keep in mind that when you configure the cooler as exhaust, the air that's going through the radiator is the air from inside your case. This is going to be warmer than the external ambient air because your components - especially the GPU - generate heat. The coolant can only be as cool as the air that's used to cool it and the CPU can only be as cool as the radiator coolant. That's physics and you aren't going to change it.
__________________
Please click "Edit System Specs" and fill out your system info.

This comment is provided "as-is", without warranty of any kind, express or implied, including, but not limited to, the sanity or mental fitness of the author. The author is not a Corsair employee, does not represent Corsair, and no comment should be construed as an official statement from Corsair.

Reply With Quote


Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:14 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.