Neoeclectic Posted April 22, 2018 Share Posted April 22, 2018 Hi, How long are the tubings on the H115i Pro & H150i Pro? I wish to front mount one of these at the front of a Fractal Define R6 but it's a slightly longer case. So my concern is that the tubing will not reach or won't leave slack for management. Thank you. Link to comment Share on other sites More sharing options...
Corsair Employee Corsair Lettuce Posted April 23, 2018 Corsair Employee Share Posted April 23, 2018 Hi, How long are the tubings on the H115i Pro & H150i Pro? They're both roughly about 14inches from the radiator to the pump itself. Link to comment Share on other sites More sharing options...
Neoeclectic Posted April 23, 2018 Author Share Posted April 23, 2018 Thank you for the reply. Hopefully, I will get lucky because I already ordered it. I measured the distance from the front position to where the host inlets will be to the CPU socket at 13". It sounds like to me 14" inches could be a hair too short possibly. Link to comment Share on other sites More sharing options...
KoSoVaR Posted May 24, 2018 Share Posted May 24, 2018 What did you end up doing here? Was it long enough to mount on the front? I'm having the same dilemma and just ordered the h150i. Link to comment Share on other sites More sharing options...
Neoeclectic Posted May 26, 2018 Author Share Posted May 26, 2018 The hoses are long enough and I front mounted the rad. There was a tiny bit of slack leftover so I could route the tubing out and away from the center of the case. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.