Dustin1706 Posted October 28, 2018 Share Posted October 28, 2018 Hello, I've got a 1000d that I'm going to do 4x 480 rads (one pair will be push, one pair in pull) so 16 fans, plus 2 case fans. I'd like to run some corsair RGB strips as well. I'll be using ML120 Pro RGBfans. I'll be running an Aquaero 6 to power/control the fan speed, so I'm not concerned about using the Commander Pro for that. What's the best way for me to control the RGB on the fans? I've read all of the setup threads, but I haven't seen any examples with this many fans. I am assuming that I can run it as I have illustrated below? Obvioulsy everything has it's own sata power connection. If I want more than 32 fans/rgb strips connected, do I then just add another Commander pro and do the same? Link to comment Share on other sites More sharing options...
DevBiker Posted October 28, 2018 Share Posted October 28, 2018 If you don't need the fan speed control, I would just add Lighting Node Pros (NoPros) rather than additional Commander Pros (CoPros). Each Lighting Node Pro can control two fans hubs and two fan hubs can control up to 6 fan RGB. The ML multipacks will come with both a Lighting Node Pro and a Fan Hub so you will likely have NoPros to spare .... so get the Expansion Packs for the strips. And did you see Zotty's diagrams in the RGB FAQ? Or here? http://forum.corsair.com/v3/showthread.php?t=180073. gutcheck has also done some interesting things : http://forum.corsair.com/v3/showthread.php?t=178402 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.